Differences

This shows you the differences between two versions of the page.

--- fadercore_-_vlr-8x16ledmeter [2014/07/24 21:42]
novski created
+++ fadercore_-_vlr-8x16ledmeter [2014/07/30 11:58] (current)
novski
@@ Line 1: / Line 1: @@
-====== Fadercore ======
+[[fadercore_-_fadermodule_for_audio_daw|Fadercore]]
+Standard 220mm wide modules
 ===== VLR-8x16LEDmeter =====
-Cumming soon...
+A solution to add 8 Meters with 16 LEDs for each Meter.
+It contains 2 different Types of PCBs one is the LEDmatrix and the other a slim PCB to mount 16LEDs called meterboard.
+{{:fadercore_vlr-meterboard_beispiel_1_kanal_bestueckt.png?600|}}
+Eagle Files: [[https://github.com/novski/Midibox/tree/master/VLR-8x16LEDmeter]]
+{{:fadercore_vlr-ledmatrix_unbestueckt_top.png?200|}} {{:fadercore_vlr-meterboard_bestueckt_sideview.png?200|}}\\
+ {{:fadercore_vlr-ledmatrix_dimensions.png?300|}} {{:fadercore_vlr-meterboard_dimensions.png?200|}}
+==== BOM ====
+BIll of Material
+Allways look for the cheapest seller, the Price may vary heavy!!!
+And look for Local dealers preferred. [[http://www.midibox.org/dokuwiki/doku.php?id=where_to_order_components]]
+To make a small and easy to connect matrix over a hole Frontplatte is no fun. Thats why i made myself a better solution. Based on the common DOUT modules it can be connected to 3 SRs.
+== The Materials: Mouser ==
+  * 3x10pin Header, 517-30310-6002
+  * 6x10pin Sockets, 517-D89110-0131HK
+  * 16x20pin Header, 517-30320-6002
+  * 16x20pin Sockets, 517-D89120-0131HK
+  * 20 Wire Ribbon Cable, 523-135-2801-020FT
+  * about 80 Green LEDs, 604-WP3A8GD
+  * about 80 Yellow LEDs, 604-WP3A8YD
+  * about 80 Red LEDs, 604-WP3A8HD
+Project Order Basket on Mouser: [[http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=5ecf7b4949]]
+The PCB is available under:
+[[https://www.vlrlab.com/home/18-ledmatrix.html]]
+[[https://www.vlrlab.com/home/19-meterboard.html]]
+==== How to get Started ====
+The LEDs are mounted to the Edge of the Meterboard to get a very slim form. That makes it a bit harder to solder them but i guess that no one wont be able to do it.
+To solder the Header to the Edge there is a wite triangle printed to the PCB on one side. This Triange has to match with the Triangle on the Header.
+==== Prepare the PCB ====
+Well you should now by now how to solder Headers... :-)
+==== Prepare the Connection ====
+Connect the SEL, Row1-8 & Row9-16 with each a DOUT Header.
+==== Test it in MIOS ====
+\\
+I use a Encoder connected directly to a DIN to test.
+Assuming that the DOUT is the first device on the chain of J8/9 we need to configure it like this:\\
+\\
+RESET_HW\\
+\\
+LCD "%C"\\
+LCD "@(1:1:1)OLED1"\\
+\\
+# Test D-OUT LEDmatrix board\\
+\\
+DOUT_MATRIX n=1  rows=8 inverted=1 sr_dout_sel1=1 sr_dout_r1=2  sr_dout_r2=3\\
+\\
+# Matrix control by a Encoder connected to DIN\\
+ENC n=1 sr=1 pins=0:1 type=detented2\\
+\\
+EVENT_ENC id= 1  fwd_id=LED_MATRIX:1   type=CC chn= 1 cc= 24  lcd_pos=1:1:2 label="^std_enc" LED_MATRIX_PATTERN=1\\
+\\
+LED_MATRIX_PATTERN n= 1  pos= 0  pattern=0000000000000000\\
+LED_MATRIX_PATTERN n= 1  pos= 1  pattern=1000000000000000\\
+LED_MATRIX_PATTERN n= 1  pos= 2  pattern=1100000000000000\\
+LED_MATRIX_PATTERN n= 1  pos= 3  pattern=1110000000000000\\
+LED_MATRIX_PATTERN n= 1  pos= 4  pattern=1111000000000000\\
+LED_MATRIX_PATTERN n= 1  pos= 5  pattern=1111100000000000\\
+LED_MATRIX_PATTERN n= 1  pos= 6  pattern=1111110000000000\\
+LED_MATRIX_PATTERN n= 1  pos= 7  pattern=1111111000000000\\
+LED_MATRIX_PATTERN n= 1  pos= M  pattern=1111111100000000\\
+LED_MATRIX_PATTERN n= 1  pos= 8  pattern=1111111110000000\\
+LED_MATRIX_PATTERN n= 1  pos= 9  pattern=1111111111000000\\
+LED_MATRIX_PATTERN n= 1  pos=10  pattern=1111111111100000\\
+LED_MATRIX_PATTERN n= 1  pos=11  pattern=1111111111110000\\
+LED_MATRIX_PATTERN n= 1  pos=12  pattern=1111111111111000\\
+LED_MATRIX_PATTERN n= 1  pos=13  pattern=1111111111111100\\
+LED_MATRIX_PATTERN n= 1  pos=14  pattern=1111111111111110\\
+LED_MATRIX_PATTERN n= 1  pos=15  pattern=1111111111111111\\
+\\
+Im using my VLR-8oDisp board to show the Values of the encoder. You can change it to any other type of Display-setting... lcd_pos=6:1:5 {6=Display number : 1= X-axis : 5= Y-Axis (row)}
+For any Comment or Question: Forum Thread???

MIDIbox

User Tools

Site Tools

Differences

Page Tools