Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 88 Hits
- ot mentioned in this guide. This guide is written first of all for new users who are not looking for info... track, will get initialised.
>>>//Let's take the first two tracks in Group 1 (i.e. G1T1 and G1T2). At th... ressing GPB10.
>>>//For example, if you want the first CC parameter layer (layer A) of your newly initia... MIDI Channel ===
Each track sends out its data, first, into a physical output port, and second, on one
- din_dout_pintable: 14 Hits
- om 0, and sometimes from 1.
Means: sometimes the first pin or shiftregister has number 0, sometimes
it h... el:**
pin-number 0 (software level) is D7 of the first shift register (hardware level), not D0!\\
pin-nu... nd shift register(hardware level), not D7!\\
The first shift register is for both DIN and DOUT the one t... H <- R1 <- R1::G ..... R2::qH <- R2::H etc.\\
The first bit read is DIN1::I7, this goes to the MSB on sof
- home:mbhp:module:din_dout_pin_list: 13 Hits
- DIN PCB / SR IC) ^ Pin Name (DOUT PCB / SR IC) ^
|first|1|0|0x00|D0 / QA|D7 / H|
|first|1|1|0x00|D1 / QB|D6 / G|
|first|1|2|0x00|D2 / QC|D5 / F|
|first|1|3|0x00|D3 / QD|D4 / E|
|first|1|4|0x00|D4 / QE|D3 / D|
|first|1|5|0x00
- pedal_box: 13 Hits
- he banksticks with the required info. \\
\\
The first bankstick is used by PB with info about itself (M... The pin number assigned for bank down (2-33)\\
**FIRST_PEDALSWAP_DIN_PIN** - The pin assigned to the fis... or none. \\
**DOUT_DIGITS_SR** - Which SR is the first digit connected to. \\
==Example of pbx_confi... ecial buttons for setup modes are the same as the first 2 fixed buttons. \\
* PedalSwap is activated
- protodeck: 12 Hits
- !). It involves 64 buttons + 64 RGB leds.\\
The first row of button mute the track and gives informatio... ctivate a specific FX and the volume pot.\\
The first track is the main drums track. This drum track is...
for each row r\\
    feed 5v to pin r of first SR and send 0v to the other (only one row at a ti... u can do with max, Max For Live & Live.\\
\\
First, the live set.\\
\\
\\
**\\
The live set*
- pedal_box:manual: 11 Hits
- oaded (due to the MBHP limit of 8 banksticks, the first is used for internal settings).
When setting up ... screen_1p.jpg}} \\
The last screen is where you first set the low value, and after sending the screen c... p midi event. This is on the channel matching the first bankstick, with cc 0x7f, and a value of 0x7c. \\ ... you can select the patch number you want for the first cue. \\
Sending next or previous cue events, wil
- frequently_asked_questions_faq: 10 Hits
- nth based on (insert name of chip) for me? **
The first question has an obvious answer of: "No". People (... can waste the time of ;) Try tinkering with those first, if you want to. When you're taking a chip out of... ed into a microchip - don't expect success at the first try.
Having said that, if you feel you're up to ... a LCD for running the MIDIbox?**
If this is your first MIDIbox take the answer to be yes.
It really dep
- mcan: 9 Hits
- ermines what device is permitted to transmit data first and what will be the next available device. This ... n fact.\\
When a packet is received, the CAN will first check if it is valid (CRC etc.) then it will prop... mask and the ID required.
For each filter it will first apply the mask to the incoming ID; this will reve... sed by the regular MIDI datas(3 bytes max) and in first byte there's two more nibbles, the **cable** for
- wilba_mb_6582_control_surface_construction_guide: 9 Hits
- B-Weld, it is best to solder the tactile switches FIRST and then use these (along with the PCB and panel ... B-Weld does not stick well to the panels from the first bulk order! This may be solved by sanding (roughe... lap the LCD PCB! You must solder these on the top first then trim leads as close as possible.**
Insert L... ional about it, put all the screws in the spacers first, without screwing them in fully, then tighten the
- pedal_box:pc_editor_manual: 8 Hits
- t to learn more about programming.
So this is my first ever java application, without any formal trainin... shown in order, with their control number listed first.
Let's use CC's as an example:
- open the CC's... Event List.
* Open the desired Map folder.
The first in the list is 'Entries: ##' - This number tells ... 'off', 'Quarter', and 'half'. You need to use the first 3 entries.
* Entries: 3
* 1 | 0: Off
* 2
- home:software:picasm: 7 Hits
- ction is defined with the __WPARAM directive, the first byte of the first parameter will be moved to WREG.
* All the other paramteres will be pushed to the stack in reverse direction (last parameter first).
* If a parameter is more than one byte long, always the most significant byte will be pushed first.
* Pointer types can have different sizes (depe
- stuartm_stukontrol: 7 Hits
- The idea to develop the StuKontrol is based on my first experiences using a MIDI controller to control Ab... sion View to "perform" tracks in a live way.
This first approach was with the Evolution UC-33, which had ... he MIDIbox project but decided to go for hardware first, so I build a MBSeqV2 in 2007.
End of 2008, I pur... ll have to build a MIDIbox controller.
I did some first sketches how the layout could be done.
First idea
- aout_ng: 7 Hits
- der the components from flat to high. This means: First solder the TLV5630 (carefully inspect the IC that... bridges instead of the horizontal jumpers.
===== First Test =====
As the most expensive part on the mod... re proceeding. You can leave out the TL074s for a first test. Then connect J1 to the core. Power up your ... e used to adjust zero offset.
**Midibox SID**
First recompile the MB-SID firmware to use the AOUT_NG
- pic18f4685_8bit_lcd_driver: 7 Hits
- transfers
;; MIOS_LCD_OPTION1 contains the first LCD option given by MIOS_LCD_TypeSet
;; MIOS_LCD... tInit
;; MIOS_GLCD_FONT_X0 for GLCDs: the first byte within a char entry
;; MIOS_GLCD_FONT_OFFSE... e USER_LCD_STATUS_LCD0_DISABLED 0 ; bit0: if set, first LCD disabled
#define USER_LCD_STATUS_LCD1_DISABLE... TUS_CUR_LCD 3 ; bit3: if cleared: current LCD is first LCD, else second LCD
;; ------------------------
- cubase: 7 Hits
- introduction_to_ucapps.de: 6 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 6 Hits
- windows_toolchain_svn: 6 Hits
- home:mbhp:module:din: 5 Hits
- korg_wavedrum_midification: 5 Hits
- home:mbhp:module:aout_ng: 5 Hits
- mbhp_genesis: 5 Hits
- howto:dev:autotools-skeleton: 5 Hits
- mb_olre16: 5 Hits
- wilba_mb_6582_base_pcb_construction_guide: 5 Hits
- windows_toolchain_core: 4 Hits
- flo: 4 Hits
- din_module: 4 Hits
- midibox_speakjet_k64_modul: 4 Hits
- mb_2069: 4 Hits
- ssm2044_pcb: 4 Hits
- wiki:test_page: 4 Hits
- using_pic18f4620: 4 Hits
- elo: 4 Hits
- seqv4plus_le_mec: 4 Hits
- midibox_sid_faq: 4 Hits
- questionable: 3 Hits
- wcore_res-sd: 3 Hits
- midibox_tia: 3 Hits
- apparat_20_construction_blog: 3 Hits
- windows_mios32_toolchain_core: 3 Hits
- john_e._finster: 3 Hits
- ain_4: 3 Hits
- user_contest2007: 3 Hits
- wilba_mb_6582_prototype: 3 Hits
- dictionary:boolean: 3 Hits
- windows_toolchain_codeblocks: 3 Hits
- wickedblade: 3 Hits
- dseq32: 3 Hits
- seq_gp: 3 Hits
- acsensorizer_04: 3 Hits
- trsequencer: 3 Hits
- bosone: 3 Hits
- wiki:syntax: 3 Hits
- mb808: 3 Hits
- cs1: 3 Hits
- fnp-sid: 3 Hits
- c_from_first_principles: 3 Hits
- howto:dev:libcan: 3 Hits
- midi_specification: 3 Hits
- seq_buttons: 2 Hits
- emf: 2 Hits
- decibel: 2 Hits
- dougwellington_alps_type_n_motorfader_bulk_order: 2 Hits
- mbqg_fp: 2 Hits
- stack: 2 Hits
- martinsomerville: 2 Hits
- troubleshooting_lcd_displays: 2 Hits
- home:project:midibox_sid:tb303_mode: 2 Hits
- home:project:mb808: 2 Hits
- stryd_one_codeblocks: 2 Hits
- linux_mios32_toolchain_core: 2 Hits
- phunk: 2 Hits
- waldorf_knobs_bulk_order_spring_2014: 2 Hits
- midiboxmixer: 2 Hits
- midiboxdmx: 2 Hits
- coresound: 2 Hits
- velocity_converter: 2 Hits
- midibox_sid_tb303_mode: 2 Hits
- mios_c_simulator_-_debugger: 2 Hits
- bipolar_12v_psu: 2 Hits
- home:about:midibox: 2 Hits
- eclipse: 2 Hits
- simple_midi_specification: 2 Hits
- mb_clock: 2 Hits
- midibox_sid_v1_manual: 2 Hits
- pga:purpose: 2 Hits
- mbhp_acronyms: 2 Hits
- fadercore_-_vlr-8enc: 2 Hits
- pga:buildoutbrd: 2 Hits
- howto_create_a_pcb_english_german: 2 Hits
- adding_two_buttons_for_l_r_sid_selection_instead_of_one: 2 Hits
- fadercore_-_vlr-3x8but: 2 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 2 Hits
- pga:preconfigsoftware: 2 Hits
- home:skills:etching_pcbs: 2 Hits
- dictionary:4-bit_mode: 2 Hits
- home:project:midibox_sid_tb303_mode: 2 Hits
- midibox_sd_card_sample_player: 2 Hits
- home:project:midibox_sid_v1_manual: 2 Hits
- wiki:welcome: 2 Hits
- electronics_basics: 2 Hits
- kicad: 2 Hits
- easy_cv: 2 Hits
- dictionary:binary: 2 Hits
- enc_4_4: 2 Hits
- mbcv_dindout: 2 Hits
- aout_4: 2 Hits
- display_driver: 2 Hits
- ssm2164_getting_started: 2 Hits
- m16: 2 Hits
- northernlightx: 2 Hits
- wilba_mb_6582_parts_list: 2 Hits
- seqv4plus_jog: 2 Hits
- wcore_usb: 2 Hits
- seqv4plus_enc-plate: 2 Hits
- wilba_mb_6582: 2 Hits
- midiboxfx_-_midifiying_analog_gear: 2 Hits
- cv1: 2 Hits
- loopa-eurorack-panel: 2 Hits
- phatline: 2 Hits
- installing_gputils_and_sdcc_on_osx: 2 Hits
- antixfm: 2 Hits
- seq_v4l_mk._ii: 2 Hits
- home:project:midibox_sid:v1_manual: 2 Hits
- introduction_to_midi: 2 Hits
- troubleshooting: 2 Hits
- stryd_one_preparation: 2 Hits
- midibox_speakjet: 2 Hits
- gslug: 1 Hits
- crystals_and_oscillators: 1 Hits
- wcore_i2c: 1 Hits
- wcore_midi8: 1 Hits
- sinesurfer: 1 Hits
- soundcards_with_ymf262_and_or_yac512_chips: 1 Hits
- home:skills:soldering: 1 Hits
- wcoref4_pcb: 1 Hits
- gm5x5x5_noob_guide: 1 Hits
- rs-232: 1 Hits
- nebula_bulk_orders_rean: 1 Hits
- book_reviews: 1 Hits
- fadercore_-_vlr-8x16ledmeter: 1 Hits
- hardsid.dll: 1 Hits
- scs-oled: 1 Hits
- wcore_line-transmit: 1 Hits
- ludovic_drochon: 1 Hits
- lemonhorse: 1 Hits
- wilba_mb_6582_parts_bulk_order: 1 Hits
- wilba_mb_seq_construction_guide: 1 Hits
- mios_faq: 1 Hits
- kartoshka_encoders: 1 Hits
- jackchaos: 1 Hits
- irda: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- durisian: 1 Hits
- midibox_audiomatrix: 1 Hits
- triggermatrix4: 1 Hits
- home:project:midi_mapper: 1 Hits
- home:skills:troubleshooting:hardware: 1 Hits
- triggermatrix5: 1 Hits
- midibox_live: 1 Hits
- midiboxkb_-_using_a_c64_keyboard_as_input: 1 Hits
- coilwinder: 1 Hits
- wilba: 1 Hits
- c_tips_and_tricks_for_pic_programming: 1 Hits
- openpad: 1 Hits
- midibox_arp: 1 Hits
- soldering: 1 Hits
- pad_4_4: 1 Hits
- envelope-follower-bissel-based: 1 Hits
- mnmlcore: 1 Hits
- voltage_divider: 1 Hits
- layout_improvements: 1 Hits
- dipcoref4: 1 Hits
- dictionary:array: 1 Hits
- xyz-ir-controller: 1 Hits
- fadercore_-_vlr-8odisp: 1 Hits
- midibox_3396: 1 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 1 Hits
- midibox_ay_3_8912: 1 Hits
- mididocs:seq:launchpadblm: 1 Hits
- msq-cc-bcr: 1 Hits
- lucem: 1 Hits
- getting_started_faq: 1 Hits
- audiocommander: 1 Hits
- dengel: 1 Hits
- arumblack: 1 Hits
- ainser8_module: 1 Hits
- aout_lc_module: 1 Hits
- speakjet_application_software_v_0.2: 1 Hits
- dseq_bs: 1 Hits
- ainser64_module: 1 Hits
- speakjet_control_overview: 1 Hits
- capacitor: 1 Hits
- darlington_pair: 1 Hits
- wild_weasel: 1 Hits
- home:skills:troubleshooting: 1 Hits
- pga:configmixer: 1 Hits
- mb_mixer_pcb_bulk_order: 1 Hits
- changing_dout_pins: 1 Hits
- forum_highlights_huis: 1 Hits
- chaos_matrix: 1 Hits
- nils_bulk_terms: 1 Hits
- shortcut_trigger_for_enttec_light_factory: 1 Hits
- where_to_order_components: 1 Hits
- acmidiprotocol: 1 Hits
- how_to_use_midibox_cv_with_a_dout: 1 Hits
- tos_-_a_tds_controller_blog: 1 Hits
- speakjet_application_software_v_0.1: 1 Hits
- home:mbhp:parts: 1 Hits
- midibox_quad_genesis: 1 Hits
- mb-scope: 1 Hits
- eagle: 1 Hits
- pga:smtsoldering: 1 Hits
- gm5x5x5: 1 Hits
- dictionary:ata: 1 Hits
- ultracore: 1 Hits
- best_song_produced_with_midibox_gear: 1 Hits
- mididocs:midibox_seq_v4: 1 Hits
- acsensorizer_02: 1 Hits
- dictionary:antenna: 1 Hits
- dictionary:bug: 1 Hits
- midibox_fm_21: 1 Hits
- compiled_c_code_size: 1 Hits
- stryd_one: 1 Hits
- pga:buildregbrd: 1 Hits
- home:mbhp:module:opl3: 1 Hits
- control_surface_troubleshooting: 1 Hits
- midibox_pokey_2: 1 Hits
- mb909: 1 Hits
- mb_visual_metronome: 1 Hits
- midibox_master_keys: 1 Hits
- home: 1 Hits
- dougwellington_mb6582_panels: 1 Hits
- integrated_circuit: 1 Hits
- home:project:midi_router: 1 Hits
- frailn_ay-3-8912_mini_sale: 1 Hits