Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 23 Hits
- building the unit, the control surface, where to get the parts etc. It is intended to be useful when y... Track Event page etc.), to indicate the means to get to that page quickly.
All knobs are called //gen... ce or a few times, depending on where you are) to get to the top menu, then using the datawheel to brow... ing displayed on the LCDs, the active track, will get initialised.
>>>//Let's take the first two track
- wilba_mb_6582_base_pcb_construction_guide: 13 Hits
- he 9v DC to the 5v DC to create 14v DC, enough to get the 12v required for 6581 SIDs. Instead of a volt... CB as a potential workaround for people unable to get a C64 PSU. People could generate 5v from a single... just giving people some extra options should they get really stuck buying a C64 power supply.//
=====... ce I can give is buy the thinnest solder you can, get a temperature controlled soldering iron with a fi
- protodeck: 12 Hits
- ardware, you'll have to multiplex the software to get a complete & correct multiplexing\\
\\
The pr... n the big PCB... I had to re-order it in order to get a correctly done PCB.\\
\\
I put midibox modu... s with a Makefile file.\\
\\
The right way to get all of these file is to go there:\\
[[http://sv...
if (clip_slot_grid[x][y].get("has_clip") == 1)
{
- aout_ng: 10 Hits
- before, the MAX525 is quite expensive and hard to get, so only choose this module if you really know wh... == TLV5630IDW ====
this is the only difficult to get part - the rest is available at every good electr... up (dimmer than normal), and the TLV5630 start to get increasingly hot, possibly damaging it after a wh... d Iv1..Iv8 are all disabled. This is necessary to get access to the full output value range. Set all ju
- midibox_sid_faq: 8 Hits
- = Do I need the most elaborate control surface to get some sound out of my SID? =====
No. Although the... synth? =====
Since the SID is a mono device; to get stereo output, you need more than one SID module.... nnected or not.
===== Do I need a BankStick to get the MIDIbox SID running? =====
No, the BankStick... 5V (7805) regulators on your CORE module(s) will get very hot, especially if you are powering a backli
- frequently_asked_questions_faq: 7 Hits
- ply every day, but keep cool - your message won't get lost. Note also that he is sometimes on vacation - in Germany they get 30 days and more a year :)
* ** I have posted... t for the PIC is very helpful to be sure it won't get damaged while soldering.
Microchip provides seve... /midibox_ext/lfo/breadboard.jpg]]
* **How Do I get the firmware into the PIC microcontroller?**
You
- windows_toolchain_core: 7 Hits
- //www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2042¶m=en020453&pageId=74|Microch... this will not only make it easier for newbies to get started, but for ASM coders like myself to transf... an [[http://sdcc.sourceforge.net/snap.php#Windows|get the latest snapshot]] if you're more experienced.... an also cause perfectly good code to fail. If you get the snapshot, search for "i586-mingw32msvc-setup"
- wilba_mb_6582_control_surface_parts_list: 7 Hits
- h non-anodized aluminium. **Avoid JB-Kwik PLEASE! Get the original JB-Weld! Do not get cheap imitations! You need a slow setting time, JB-Kwik is TOO KWIK!!... f shaft to 3.0mm diameter at top of shaft. If you get switches like this from another manufacturer, the... he extra PCBs and 7mm switches (and know where to get 4x20 PLEDs).
* 3mm LEDs, preferably bright one
- wilba_mb_6582_psuopte: 7 Hits
- 6582 15V, use a 7812 and both 9V and 5V sVregs to get 12V, 9V, and 5V to run a mixed SID environment, b... ad the entire tutorial before proceeding**. Let’s get started.
=====How does the BOM change?=====
* ... u probably want at least 1.5A. You may be able to get away with less amperage, especially if you’re not... 1.5A is recommended, although. You may be able to get away with 1A, especially if you’re leaving out so
- wickedblade: 6 Hits
- t it will never reach completion, but I'll try to get it the closest possible to completion.
August 20... effect loops, it will be stuffy but I think I can get it all to fit and still be particable(and be able... being conservative, it appears that I can easily get away with 32 bytes per custom control, and then 2... but for the input/output buffers opamp, I need to get as much headroom as possible. 9-10V might do the
- stryd_one_preparation: 6 Hits
- , please don't be offended. They aren't trying to get rid of you :) It just means that they know that t... e it any more. If you think you've read enough to get started, go and read it again. Seriously, informa... the end result.
Use the right tool for the job. Get all the tools you need. Don't be a cheapskate, get what you need. This doesn't mean you have to spend
- home:mbhp:parts: 6 Hits
- on't order from Farnell or RS-Components, you can get it 90% cheaper elsewhere. Shop around! Good local... the components at reasonable prices, but you can get things much cheaper from Australian electronics d... switchesplus.com.au|Switches Plus]] for harder-to-get things like ALPS switches, rotary encoders, slide... ibute for many different brands. If you wanted to get Everything you needed for one project on one bill
- where_to_order_components: 6 Hits
- ibute for many different brands. If you wanted to get Everything you needed for one project on one bill... a)]] - Will charge GST for Canadians so you don't get nailed with Customs. --- //Shadyman//
* [[http... on't order from Farnell or RS-Components, you can get it 90% cheaper elsewhere. Shop around! Good local... the components at reasonable prices, but you can get things much cheaper from Australian electronics d
- home:mbhp:module:lcd: 6 Hits
- ite edge of the PCB. I'll update the guide once I get some hours accumulated on this additional step to... gnments on the LCD modules also vary. Be sure you get a data sheet with the pinout for your LCD module.... gh it should, did **not** work for me; I couldn't get the pinning right: see http://www.midibox.org/for... has one of these chips, there are good changes to get it work. These chips have similar instruction set
- mididocs:seq:building: 6 Hits
- wilba_mb_6582: 6 Hits
- bipolar_12v_psu: 5 Hits
- lcd: 5 Hits
- martinsomerville: 5 Hits
- home:skills:tools: 5 Hits
- stryd_one_codeblocks: 5 Hits
- introduction_to_ucapps.de: 5 Hits
- midibox_audiomatrix: 5 Hits
- wilba_mb_6582_parts_list: 4 Hits
- wiki:welcome: 4 Hits
- mcan: 4 Hits
- windows_toolchain_codeblocks: 4 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 4 Hits
- durisian: 4 Hits
- home:mbhp:module:aout_ng: 4 Hits
- dougs_solder_price_survey: 4 Hits
- waldorf_knobs_bulk_order_2012: 4 Hits
- wilba_mb_seq: 4 Hits
- macos_mios32_toolchain_core: 4 Hits
- wilba_mb_seq_construction_guide: 4 Hits
- easy_cv: 3 Hits
- mbqg_fp: 3 Hits
- getting_started_faq: 3 Hits
- mb808: 3 Hits
- midibox_pokey: 3 Hits
- home:about:midibox: 3 Hits
- windows_toolchain_svn: 3 Hits
- acsim_mios_c: 3 Hits
- home:project:mb808: 3 Hits
- midi_interface_blacklist: 3 Hits
- ssm2164_getting_started: 3 Hits
- user_contest2007: 3 Hits
- korg_wavedrum_midification: 3 Hits
- midiboxfx_-_midifiying_analog_gear: 3 Hits
- wilba_mb_6582_control_surface_construction_guide: 3 Hits
- mididocs:seq:blm16x16_build_guide: 3 Hits
- albs_waldorf_knobs_2011_bulk_order: 3 Hits
- installing_gputils_and_sdcc_on_debian_linux: 3 Hits
- c_tips_and_tricks_for_pic_programming: 3 Hits
- wilba_mb_6582_parts_bulk_order: 3 Hits
- serial_graphics_tablet: 2 Hits
- home:skills:etching_pcbs: 2 Hits
- pcb: 2 Hits
- home:software:windows:word2doku: 2 Hits
- pga:smtsoldering: 2 Hits
- home:skills:soldering: 2 Hits
- home:skills:troubleshooting: 2 Hits
- dougwellington_mb6582_panels: 2 Hits
- stryd_one_word2doku: 2 Hits
- waldorf_knobs_bulk_order_2013: 2 Hits
- tk_gm5_jaycar_partlist: 2 Hits
- linux_midi: 2 Hits
- fadercore_-_vlr-8x16ledmeter: 2 Hits
- installing_gputils_and_sdcc_on_osx: 2 Hits
- pga:purpose: 2 Hits
- nils_bulk_terms: 2 Hits
- i_o: 2 Hits
- gslug: 2 Hits
- frailn_ay-3-8912_mini_sale: 2 Hits
- forum_netiquette: 2 Hits
- findbuddha: 2 Hits
- wilba_mb_6582_power_switch_bulk_order: 2 Hits
- waldorf_knobs_bulk_order_april_2013: 2 Hits
- zero_wait_state: 2 Hits
- howto_create_a_pcb_english_german: 2 Hits
- envelope-follower-bissel-based: 2 Hits
- fnp-sid: 2 Hits
- msq-cc-bcr: 2 Hits
- midibox_snes_apu: 2 Hits
- sammichfm: 2 Hits
- mios_c_simulator_-_debugger: 2 Hits
- installing_gputils_and_sdcc_on_ubuntu_8.04: 2 Hits
- apparat_20_construction_blog: 2 Hits
- wilba_mb_6582_prototype: 2 Hits
- home: 2 Hits
- aout_lc_module: 2 Hits
- mididocs:seq:launchpadblm: 2 Hits
- electronics_basics: 2 Hits
- seqv4plus_le_mec: 2 Hits
- ssm2044_pcb: 2 Hits
- troubleshooting: 2 Hits
- parts_faq: 2 Hits
- xyz-ir-controller: 2 Hits
- pedal_box: 2 Hits
- cv1: 2 Hits
- start: 2 Hits
- soldering: 2 Hits
- midiboxmixer: 2 Hits
- euro-aout-ng-connector-board: 2 Hits
- howto_program_a_pic: 1 Hits
- windows_toolchain_quickstart: 1 Hits
- cubase: 1 Hits
- pic18f4685_8bit_lcd_driver: 1 Hits
- howto_app_dev_eclipse_ide: 1 Hits
- sync_4_newbies: 1 Hits
- fadercore_-_vlr-8enc: 1 Hits
- pga:choices: 1 Hits
- what_is_a_midibox: 1 Hits
- midiboxdmx: 1 Hits
- pga:buildoutbrd: 1 Hits
- dseq32: 1 Hits
- synchromesh: 1 Hits
- midibox_live: 1 Hits
- windows_mios32_toolchain_core: 1 Hits
- how_to_setup_xcode3_to_access_the_svn_server: 1 Hits
- pickit2: 1 Hits
- tk_gm5_bulkorder: 1 Hits
- midiboxkb_-_using_a_c64_keyboard_as_input: 1 Hits
- mios_faq: 1 Hits
- wilba_mb_6582_license: 1 Hits
- questionable: 1 Hits
- kristal: 1 Hits
- home:mbhp:module:core: 1 Hits
- mb-lre8x2cs_pcb_bulk_order: 1 Hits
- mb_sync24: 1 Hits
- din_dout_pintable: 1 Hits
- midiboxmixerhardware: 1 Hits
- eusart_bug: 1 Hits
- fadercore_-_vlr-motorfader: 1 Hits
- fadercore_-_vlr-frontpanel: 1 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 1 Hits
- application_development: 1 Hits
- kcmil: 1 Hits
- fadercore_-_vlr-8odisp: 1 Hits
- acsensorizer_04: 1 Hits
- windows_toolchain_notepadplus: 1 Hits
- simple_midi_specification: 1 Hits
- waldorf_knobs_bulk_order_fall_2013: 1 Hits
- waldorf_knobs_bulk_order_spring_2014: 1 Hits
- mb_clock: 1 Hits
- wilba_mb_seq_pcb_bulk_order: 1 Hits
- pedal_box:pc_editor_manual: 1 Hits
- mios: 1 Hits
- fantomxr: 1 Hits
- mbseq_panel_gb: 1 Hits
- pedal_box:manual: 1 Hits
- etching_pcb: 1 Hits
- aout_4: 1 Hits
- enc_4_4: 1 Hits
- midibox_quad_genesis: 1 Hits
- mb_2069: 1 Hits
- mididocs:midibox_seq_v4: 1 Hits
- dictionary:bandwidth: 1 Hits
- seq_v4l_mk._ii: 1 Hits
- kicad: 1 Hits
- home:mbhp:module:core32: 1 Hits
- simple_cv: 1 Hits
- stuartm_stukontrol: 1 Hits
- wilba_midibox_rc: 1 Hits
- home:project:midibox_sid:v1_manual: 1 Hits
- speakjet_breadboard_construction: 1 Hits
- mb_visual_metronome: 1 Hits
- eagle: 1 Hits
- introduction_to_midi: 1 Hits
- display_driver: 1 Hits
- ssm2164_pcb: 1 Hits
- home:project:midibox_sid_v1_manual: 1 Hits
- tm5-gate-board: 1 Hits
- lre-oled-bar2: 1 Hits
- msq-cc-lre-v2: 1 Hits
- mbhp_genesis: 1 Hits
- triggermatrix5: 1 Hits
- coilwinder: 1 Hits
- daw-encoder-display: 1 Hits
- blm16x16v2: 1 Hits
- sammichsid: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- msq-cc-lre: 1 Hits
- triggermatrix: 1 Hits
- stellax4: 1 Hits
- clock2audio2clock: 1 Hits
- midibox_tia: 1 Hits
- scale-explorer: 1 Hits
- mb_olre16: 1 Hits
- seq_v4_plus: 1 Hits
- howto:dev:libcan: 1 Hits
- seq4_aluminium_case_and_frontpanel_2014: 1 Hits
- fadercore_-_vlr-3x8but: 1 Hits
- stryd_one_mbhp: 1 Hits
- button_overlay: 1 Hits
- albs_waldorf_knob_-_order_no._3: 1 Hits
- qbas: 1 Hits
- drive_a_midibox-lc_with_4_lcds_on_1_core: 1 Hits
- midibox_sid_v1_manual: 1 Hits
- dcb: 1 Hits
- home:skills:bad_solderings_gallery: 1 Hits
- pga:preconfigsoftware: 1 Hits
- pga:configmixer: 1 Hits
- dougwellington_marquardt_switch_bulk_order: 1 Hits
- speakjet_application_software_v_0.1: 1 Hits
- albs_waldorf_knob_bulk_order: 1 Hits
- stryd_one: 1 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 1 Hits
- john_e._finster: 1 Hits
- mididocs:seq:usingblm: 1 Hits
- midibox_master_keys: 1 Hits
- dougwellington_transformer_bulk_order: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- zener: 1 Hits
- insulator: 1 Hits
- wilba_albs_waldorf_knob_mega_sale: 1 Hits
- thermistor: 1 Hits
- reaktor: 1 Hits
- pt10_bulk_americas: 1 Hits
- most_freaky_internal_wiring: 1 Hits
- kernel: 1 Hits
- jakes_daddy: 1 Hits
- best_user_patches_librairy: 1 Hits
- dj3nk: 1 Hits
- stryd_one_firefox_search: 1 Hits
- troubleshooting_lcd_displays: 1 Hits
- mb-sidr8tr:mb-mtrx_bulk: 1 Hits
- home:software:xplatform:firefox_search: 1 Hits
- fixed_bor_setup: 1 Hits
- howto:dev:autotools-skeleton: 1 Hits
- m00dawg: 1 Hits
- changing_din_pins: 1 Hits
- midibox_sd_card_sample_player: 1 Hits