User Tools

Site Tools


gm5x5x5

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
gm5x5x5 [2009/06/17 10:36]
89.196.21.91
gm5x5x5 [2017/09/05 08:42] (current)
cavey [Order lists] comment added. The Reichelt cart misses the 1uF capacitor. Bit me while building
Line 1: Line 1:
 ===== GM5x5x5 Module ===== ===== GM5x5x5 Module =====
 +
 +==== BEFORE YOU START SOLDERING CHECK THE ERRATA PAGE ====
  
 This page is dedicated to nILS' standalone GM5 USB-To-Midi PCB. All information present on and files linked to from this site is  This page is dedicated to nILS' standalone GM5 USB-To-Midi PCB. All information present on and files linked to from this site is 
Line 12: Line 14:
   * [[http://​www.midibox.org/​dokuwiki/​gm5x5x5_errata|PCB errata]]   * [[http://​www.midibox.org/​dokuwiki/​gm5x5x5_errata|PCB errata]]
   ​   ​
 +==== PCB revisions =====
 +
 +  - Prototype: Green PCB
 +  - Bulk order #1, revision 1.0: White PCB
 +  - Bulk order #2, revision 1.1: Red PCB
 +
 +
 ==== PCB overview ===== ==== PCB overview =====
  
 The PCB is 8.8 x 1.925 inches (~22.4 x 4.9 cm) looks like this: The PCB is 8.8 x 1.925 inches (~22.4 x 4.9 cm) looks like this:
  
-{{http://​www.schickt.de/​mb.org/​gm5x5x5_v1.00.png?​640}}\\ (click for full size)+{{http://​www.schickt.de/​mb.org/​gm5x5x5_v1.10.png?​640}}\\ (click for full size)
  
-A .pdf version is available [[http://​www.schickt.de/​mb.org/​gm5x5x5_v1.00.pdf|here]]+A .pdf version is available [[http://​www.schickt.de/​mb.org/​gm5x5x5_v1.10.pdf|here]]
  
-A .pdf version with both layers visible is available [[http://​www.schickt.de/​mb.org/​gm5x5x5_v1.00_full.pdf|here]]+A .pdf version with both layers visible is available [[http://​www.schickt.de/​mb.org/​gm5x5x5_v1.10_full.pdf|here]]
 ==== Connectors ==== ==== Connectors ====
  
Line 32: Line 41:
 |OUT1 – OUT5 |3|MIDI Out Jacks, both available as 1x3 pin header and DIN5 socket | |OUT1 – OUT5 |3|MIDI Out Jacks, both available as 1x3 pin header and DIN5 socket |
 |IO5            |2|Digital MIDI IO (mainly for development)| |IO5            |2|Digital MIDI IO (mainly for development)|
-|USB POWER OPTION|2|Configuration jumper. Closed (jumper mounted): gm5 powered by USB (recommended). Open (no jumper mounted): gm5 powered by +5VDC via J1|+|USB POWER OPTION|2|Configuration jumper. Closed (jumper mounted): gm5 powered by USB (recommended). Open (no jumper mounted): gm5 powered by +5VDC via J2| 
 ==== Part list / BOM ==== ==== Part list / BOM ====
 +
 +{{http://​www.schickt.de/​mb.org/​warning.png}} Note that some resistor designators have changed in revision 1.1!
  
 |**Part**|**Value**|**Count**|**Footprint/​\\ lead spacing**|**Part #**| |**Part**|**Value**|**Count**|**Footprint/​\\ lead spacing**|**Part #**|
Line 47: Line 59:
 |2-pin SIL header |- |5 |100 mil|J2, J8, S1 – S3 | |2-pin SIL header |- |5 |100 mil|J2, J8, S1 – S3 |
 |EEPROM |24C04 |1 |DIP8 |IC2 | |EEPROM |24C04 |1 |DIP8 |IC2 |
-|Resistor |220 Ohm |15 |0207 |R1 – R3, R6 – R8, R11 – R13, R16, R18, R31 – R33, R39| +|{{http://​www.schickt.de/​mb.org/​warning.png}} ​Resistor ​(PCB rev 1.0) |220 Ohm |15 |0207 |R1 – R3, R6 – R8, R11 – R13, R16, R18, R31 – R33, R39| 
-|Resistor |**1k Ohm(*1)** |18 |0207 |R5,​ R10, R15, R17, R20 - R30, R35, R38, R40 |+|{{http://​www.schickt.de/​mb.org/​warning.png}} ​Resistor ​(PCB rev 1.1) |220 Ohm |15 |0207 |R1 - R3, R6 - R8, R11 - R13, R16 - R18, R31 - R33| 
 +|{{http://​www.schickt.de/​mb.org/​warning.png}} Resistor (PCB rev 1.0) |**1k Ohm(*1)** |18 |0207 |R5,​ R10, R15, R17, R20 - R30, R35, R38, R40 | 
 +|{{http://​www.schickt.de/​mb.org/​warning.png}} Resistor (PCB rev 1.1) |**1k Ohm(*1)** |18 |0207 |R5,​ R10, R15, R20 - R30, R35, R38 - R40|
 |Resistor |27 Ohm |2 |0207 |R36,​ R37 | |Resistor |27 Ohm |2 |0207 |R36,​ R37 |
 |Resistor |4.7k Ohm |5 |0207 |R4,​ R9, R14, R19, R34 | |Resistor |4.7k Ohm |5 |0207 |R4,​ R9, R14, R19, R34 |
Line 66: Line 80:
 (*2) The inverters can be left out when no status LEDs are needed. Leaving them will require soldering some additional bridges which will be described in a section in this document later on. (*2) The inverters can be left out when no status LEDs are needed. Leaving them will require soldering some additional bridges which will be described in a section in this document later on.
  
-**Don'​t forget to order 6 DIP8 and 5 DIP14 IC sockets.**+**Don'​t forget to order 6 DIP8 and 5 DIP14 IC sockets ​and pin headers (16 pins total).**
  
 ==== Hardware Options ==== ==== Hardware Options ====
Line 87: Line 101:
  
 |**Port # without LEDs**|**Wires to add**| |**Port # without LEDs**|**Wires to add**|
-|5|IC7:3 - IC7:2, IC7:11 - IC7:13| +|5|IC7:3 - IC7:2, IC7:10 - IC7:13| 
-|4|IC6:3 - IC6:2, IC6:11 - IC6:13| +|4|IC6:3 - IC6:2, IC6:10 - IC6:13| 
-|3|IC5:3 - IC5:2, IC5:11 - IC5:13| +|3|IC5:3 - IC5:2, IC5:10 - IC5:13| 
-|2|IC4:3 - IC4:2, IC4:11 - IC4:13| +|2|IC4:3 - IC4:2, IC4:10 - IC4:13| 
-|1|IC3:3 - IC3:2, IC3:11 - IC3:13|+|1|IC3:3 - IC3:2, IC3:10 - IC3:13|
  
 The additional LED circuitry can be left out of course, too: The additional LED circuitry can be left out of course, too:
Line 97: Line 111:
 |**Port # without LEDs**|**Parts to leave out**| |**Port # without LEDs**|**Parts to leave out**|
 |5|IC7, R29, R30, LED9, LED10| |5|IC7, R29, R30, LED9, LED10|
-|4|IC6, ​R28R29, LED7, LED8|+|4|IC6, ​R27R28, LED7, LED8|
 |3|IC5, R25, R26, LED5, LED6| |3|IC5, R25, R26, LED5, LED6|
 |2|IC4, R23, R24, LED3, LED4| |2|IC4, R23, R24, LED3, LED4|
Line 112: Line 126:
  
 |**Supplier**|**Price**|**Link**|**Comment**| |**Supplier**|**Price**|**Link**|**Comment**|
-|Reichelt|12,​37€|https://​secure.reichelt.de/?;​ACTION=20;​LA=5010;​AWKID=121145;​PROVID=2084|-|+|Reichelt|12,​37€|https://​secure.reichelt.de/?;​ACTION=20;​LA=5010;​AWKID=121145;​PROVID=2084|misses the 1uF capacitor!| 
 +|Mouser|12,​42€|http://​www.mouser.com/​ProjectManager/​ProjectDetail.aspx?​AccessID=5faef11e59|thanks to frailn. Updated by Grizz| 
 +|Allied Electronics|$37.27|[[GM5x5x5 ​Allied Parts List]]|Put together by m00dawg| 
 ==== FAQ - Frequently Asked Questions ==== ==== FAQ - Frequently Asked Questions ====
  
Line 135: Line 152:
 |8650|850| |8650|850|
 |150|1775| |150|1775|
-|6850|1775|+|8650|1775|
 |4590|1000| |4590|1000|
  
gm5x5x5.1245234964.txt.gz · Last modified: 2009/06/17 10:36 by 89.196.21.91