User Tools

Site Tools


gm5x5x5_noob_guide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
gm5x5x5_noob_guide [2009/02/24 11:24]
Twin-x created
gm5x5x5_noob_guide [2009/02/24 12:52] (current)
Twin-x
Line 1: Line 1:
-{{:​gm5x5x5:​1.jpg|}} +====== Building the GM5x5x5 ====== 
-{{:​gm5x5x5:​2.jpg|}} +==== Introduction ==== 
-{{:​gm5x5x5:​3.jpg|}} +The GM5x5x5 is a midi interface for your computer. bla bla bla 
-{{:​gm5x5x5:​4.jpg|}} +==== Building Level ==== 
-{{:​gm5x5x5:​5.jpg|}} +Noob guides have an difficulty indication from 1 to 5 where 1 is easy and 5 is hard to build. 
-{{:​gm5x5x5:​6.jpg|}} +If you have never started a project before we urge you to start with a level 1 project first. 
-{{:​gm5x5x5:​7.jpg|}} + 
-{{:​gm5x5x5:​8.jpg|}} +We indicate this project as Building level 3 
-{{:​gm5x5x5:​9.jpg|}} + 
-{{:​gm5x5x5:​a1.jpg|}} +===== Tools Needed ===== 
-{{:​gm5x5x5:​a2.jpg|}} +To start building your GM 5x5x5 board you will need some tools. 
-{{:​gm5x5x5:​a3.jpg|}} +Offcourse you could be creative and use whatever you like but this document is trying to be failsafe. 
-{{:​gm5x5x5:​a4.jpg|}} + 
-{{:​gm5x5x5:​a5.jpg|}} +  * Soldering Iron 
-{{:​gm5x5x5:​a6.jpg|}} +  * Soldering Flux 
-{{:gm5x5x5:a8.jpg|}} +  * Wire Cutter 
-{{:gm5x5x5:a7.jpg|}}+  * Beer 
 +  * etc put in pictures and so 
 + 
 +===== Component List ===== 
 + 
 +The list is build up from components that should be solderd on the board in this order. 
 +However exeptions can be made. See building chapter for changes. 
 +==== Diodes ==== 
 +==== Resistors ==== 
 +==== Sockets ==== 
 +==== Capacitors ==== 
 +==== Other ==== 
 +====== Building ====== 
 +===== The Chip ===== 
 +| This is the most difficult part of the whole project. If you manage to pull it off the rest of the project will be a breeze. Go to Link for a vid tutoriol on how to solder this.... | {{:​gm5x5x5:​1.jpg|}} ​| 
 +===== Diodes ===== 
 +|FIXME|{{:​gm5x5x5:​2.jpg|}}| 
 +|FIXME|{{:​gm5x5x5:​3.jpg|}}| 
 +===== Resistors ===== 
 +|FIXME|{{:​gm5x5x5:​4.jpg|}}| 
 +|FIXME|{{:​gm5x5x5:​5.jpg|}}| 
 +|I have accidently soldered a resistor in R9. There should'​t be a resistor in it yet|{{:​gm5x5x5:​6.jpg|}}| 
 +|FIXME|{{:​gm5x5x5:​7.jpg|}}| 
 +===== Crystal ===== 
 +|FIXME|{{:​gm5x5x5:​8.jpg|}}| 
 +===== IC Sockets ===== 
 +|FIXME|{{:​gm5x5x5:​9.jpg|}}| 
 +===== Capacitors ===== 
 +|FIXME|{{:​gm5x5x5:​a1.jpg|}}| 
 +|FIXME|{{:​gm5x5x5:​a2.jpg|}}| 
 +===== Pin Headers ===== 
 +|FIXME|{{:​gm5x5x5:​a3.jpg|}}| 
 +===== Electrolytic Capacitor ===== 
 +|FIXME|{{:​gm5x5x5:​a4.jpg|}}| 
 +|FIXME|{{:​gm5x5x5:​a5.jpg|}}| 
 +===== USB Socket ===== 
 +|FIXME|{{:​gm5x5x5:​a6.jpg|}}| 
 +===== DIN Sockets ===== 
 +|FIXME|{{:gm5x5x5:a7.jpg|}}| 
 +===== Placing IC's ===== 
 +|FIXME|{{:gm5x5x5:a8.jpg|}}|
gm5x5x5_noob_guide.1235474696.txt.gz · Last modified: 2009/02/24 11:24 (external edit)