User Tools

Site Tools


kartoshka_encoders
no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.


kartoshka_encoders [2008/09/26 20:42] (current) – created - external edit 127.0.0.1
Line 1: Line 1:
 +====== Tip from kartodesk on keeping on smooth travel after removing detents from SoundWell encoder  ======
 +Hi all. \\
 +First, there's extensive info about the encoders on [[http://www.midibox.org/forum/index.php/topic,10184.0.html|this forum thread]] to read. \\
 + \\
 +The encoders i received were from mc4 batch, identical encoders to those Wilba pictured and organized the sales earlier. \\
 +Their name is SoundWell rotary encoders (like ALPS STEC16B, "Voti" encoders). \\
 + \\
 + \\
 +The pics are here for convenience. (Wilba and MC4 took the shots)
 +{{http://www.synthware.com/cms/images/stories/electronics/soundwell_encoders/16w800/Encoder_0423_800.jpg}} \\
 +{{http://members.optusnet.com.au/~wilba6581/SoundWell_Encoder_1.jpg}} \\
  
 +When you open the encoder (might be done using kind of miniature screwdriver or similar), \\
 +the key to the smooth travel of encoder shaft - is absolute care of the inner circle where collectors travel. \\
 + \\
 +
 +**Any inaccurate screwdriver mark made while opening the encoder will result you in jerky feeling when sealed back.** \\
 +**After bending the tabs up (of the lowest metallic part, pictured above) in order to disassemble the unit, please DO NOT put your instrument \\
 +into highlighted areas (below) where thin plastic part could be deformed by your tool.** \\
 +{{http://believe.mytinydream.com/bits/1.gif}} \\
 +{{http://believe.mytinydream.com/bits/2.jpg}} \\
 + \\
 +These are sensitive areas, the weak points. \\ 
 +**keep your tool somewhere else and you're fine.** \\
 +\\
 +Also as Wilba suggested the detent could been bent just a little to make a less tactile detent. \\ 
 +It works, although more careful and attentive work is required.\\ 
 + \\
 + \\
 +In general, when you remove detents, you loose the tight feel and they begin feeling 'oiled', \\
 + exactly that feeling of steering wheel of old car against the modern hydraulics. Take this into consideration too.\\
 +\\
 +Best to all.
kartoshka_encoders.txt · Last modified: 2008/09/26 20:42 by 127.0.0.1