Differences

This shows you the differences between two versions of the page.

--- layout_improvements [2009/12/05 20:12] – selfservice
+++ layout_improvements [2011/11/18 16:04] (current) – lpdunwell
@@ Line 14: / Line 14: @@
    * try to let ca. 5 mm free at the borders, otherwise chances are high that tracks will be damaged during splitting the boards to smaller pieces
    * consider mounting holes at the edges
-   * single sided boards should be prevered before double sided boards
+   * single sided boards should be preferred before double sided boards
    * It is against the law to use any pirated/cracked software, and this is absolutely not to be done here. If you have a registered copy of Eagle, or a freeware/Eagle Light version, go right ahead. Cracked software is not only illegal, but  will also corrupt the .brd files (they cannot be opened with the freeware version anymore).
       * Consider Kicad if you need a larger layout. It is open source and free to download from [[http://kicad.sourceforge.net/]]
@@ Line 30: / Line 30: @@
 ^ Bridgeless MBHP_AOUT Module   | NorthernLightX | [[http://home.quicknet.nl/qn/prive/alex.span/midibox/mbhp_aout_v1_bridgeless.brd]]   |  |
 ^ Bridgeless MBHP_BURNER Module | NorthernLightX | [[http://home.quicknet.nl/qn/prive/alex.span/midibox/mbhp_burner_v1_bridgeless.brd]] |  |
-^ Some Layouts (including core) | rdoursenaud    | [[http://rdoursenaud.free.fr/midibox/]]                                              |  |
+^ Some Layouts (including core) | rdoursenaud    | [[http://raphael.doursenaud.fr/category/midibox/]]                                              |  |
 ^ Improved MBHP_OPL3 Module     | [[selfservice]]    | [[http://www.splabs.it/?p=16]]                      | Take care about the CORE->OPL3 connections, some pins are swapped |
 ^            ""                 |      ""        | [[http://www.splabs.it/?p=16]]                       | This is the bottom layer |