line_driver
This is an old revision of the document!
Table of Contents
LINE DRIVER Boards parts list
The line driver modules have been designed to connect SPI devices and serial shift registers (DINs/DOUTs) to a MIDIbox over long distances.
Parts List
| Description | Type | Quantity | Reichelt Ref | Mouser Ref | Digikey Ref |
|---|---|---|---|---|---|
| MC3486 | RS-422 Interface IC Quad Line | 2 | MC 3486 DIL | 595-MC3486N | |
| MC3487 | RS-422 Interface IC Quad Line | 2 | MC 3487 DIL | 595-MC3487N | |
| IC socket | 16 pin | 4 | GS 16 | 575-199316 | |
| Ceramic Cap | 100 nF (.1uF) | 4 | Z5U-2,5 100n | ||
| Resistor | 100 Ohm | 12 | 1/4W 110 | 603-MFR-25FBF52-100R | |
| D-sub female connector | 25 pin | 2 | D-SUB BU 25US | 571-1734350-1 | |
| 2×5 DIL Headers | 10 pin | 4 | WSL 10G | ||
| 2×5 DIL Sockets | 10 pin | 4 | PFL 10 | 538-87834-1019 | |
| 1-row SIL Headers | (only 13 pins required) | 1 | 855-M20-9994045 | ||
| Jumper | 10 pin | 4 | JUMPER 2,54GL RT |
Mouser Parts Cart: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=e7d04d9577
Datasheets
line_driver.1540561645.txt.gz · Last modified: 2018/10/26 13:47 by goyousalukis
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
