Differences

This shows you the differences between two versions of the page.

--- linux_mios32_toolchain_core [2024/04/05 15:22]
phatline [Setup MIOS32 Environment]
+++ linux_mios32_toolchain_core [2024/04/05 15:30] (current)
phatline [Setup MIOS32 Environment]
@@ Line 95: / Line 95: @@
 Depending on the path where your toolchain is situated, the Example Content off this file is:\\
-//PATH="/home/autark/midibox/gcc-arm-none-eabi/bin"\\
+  * PATH="/home/autark/midibox/gcc-arm-none-eabi/bin"\\
+  * MIOS32_PATH=/home/autark/midibox/mios32\\
+  * MIOS32_BIN_PATH=/home/autark/midibox/mios32/bin\\
+  * MIOS32_BOARD=MBHP_CORE_STM32F4\\
+  * MIOS32_FAMILY=STM32F4xx\\
+  * MIOS32_GCC_PREFIX=arm-none-eabi\\
+  * MIOS32_PROCESSOR=STM32F407VG\\
+  * MIOS32_LCD=universal\\
-MIOS32_PATH=/home/autark/midibox/mios32\\
+if you cant log after reboot, then mostly you messed up your "PATH" variable, in this case, boot with Linuxbootstick, and remove the PATH - line...\\
-MIOS32_BIN_PATH=/home/autark/midibox/mios32/bin\\
-MIOS32_BOARD=MBHP_CORE_STM32F4\\
+**you can also add more folders to the PATH, they are separeted with a ":", for example:**\\
-MIOS32_FAMILY=STM32F4xx\\
+* PATH="/home/autark/midibox/gcc-arm-none-eabi/bin:/home/autark/program"\\
-MIOS32_GCC_PREFIX=arm-none-eabi\\
+here we also have a folder named "program", when you put in there "Mios Studio", then you can write in Terminal "Mios Studio" and mios studio will open\\
-MIOS32_PROCESSOR=STM32F407VG\\
-MIOS32_LCD=universal//\\

MIDIbox