MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== LoopA - Eurorack - Frontpanel with breakout PCB ======
{{:phatline:Euro-LoopA-Breakout-3D.jpg?600|}}\\
{{:phatline:Euro-LoopA-Frontpanel.jpg?900|}}\\

**I made this Breakout-PCB and Frontpanel for the midiphy LoopA [[https://www.midiphy.com/en/loopa-v2/|midiphy LoopA]]**\\

**PCB Size is 172x24mm**\\
You have to decide if you want Midi Out 3 or the Gate OUT (space thing)\\
The Reset Switch and the SD, Card, are still on the base PCB...\\
If you want use the PCB you dont have place for the stock DIN Sockets!\\

{{:phatline:Euro-LoopA-Breakout-Top.jpg?900|}}\\
{{:phatline:Euro-LoopA-Breakout-Back.jpg?900|}}\\

ON this board we have 3 micromatch Connectors, which are crimped fast on a cable\\
On the other side of the cable you have to solder directly to the Base-PCB,\\
be carefull while soldering - and follow the shematic, which is layout for 3.5 Jack Midi Type B!\\
{{:phatline:Euro-LoopA-Breakout-Shematic.jpg?900|}}\\
{{:phatline:Euro-LoopA-Breakout-Shematic.pdf?900|Schematic}}\\


====== Hardware Requirements ======
  *[[https://www.midiphy.com/en/shop-details/120/69/loopa-enhanced-caseless-essential-kit-diy-requantizing-performance-midi-sequencer-midiphy-midibox-stm32f4|midiphy LoopA caseless Kit]]
  * Soldering Iron - with a Dip that can Handle Thruhole-Parts, solder Paste...\\
  * The other Parts from the BOM\\

====== Building and BOM======
All necessery Information is printet on the PCB, but also check the Shematic...\\ 

5x [[https://www.buerklin.com/de/Montageblock/p/17H917|"Leiterplatten Montageblock aka Standoffs]]\\
3x [[https://www.mouser.at/ProductDetail/TE-Connectivity/1-215079-0?qs=sGAEpiMZZMu2UVWuvJ5cF0NzRP25WJYp|Micromatch Socket 2x5Pole 1,27mm]]\\
6x [[https://www.mouser.at/ProductDetail/TE-Connectivity/1-2178712-0?qs=Xjc0wECptJBhQ3iBLfHBBw%3D%3D|Micromatch Crimp Connector]] you need only 3, the 3+ is for fails by crimping\\
1x [[https://www.mouser.at/ProductDetail/3M-Electronic-Solutions-Division/3365-10-CUT-LENGTH?qs=IOh0O5QtZ92VWnFEwLTckA%3D%3D|Flat Cable 1,27mm pitch]]\\
1x [[https://www.mouser.at/ProductDetail/Molex/67068-7041?qs=%2Fha2pyFadugeFcqiSbHe2F3FlkyTY7p9rg69fYk%252bS0tr8kIPu4fJmw%3D%3D|USB-Socket]]\\
8x [[https://www.mouser.at/ProductDetail/CUI-Devices/SJ1-3535NG?qs=sGAEpiMZZMv0W4pxf2HiVz9SCMkER55fXrlpiF5mEoVt2p3Qc8GC6g%3D%3D|3,5 Audio Jack]]\\
\\
And there will be some additional Fasting Material, like bolts, Screws, Standoffs, that i dont know right now, because the first protoype has to be built first...\\

====== Frontpanel======
{{:phatline:Euro-LoopA-Frontpanel-growing.jpg?900|}}\\
**I made a DXF File which you can send to:** (once the prototypestate is gone)\\
[[https://www.formulor.de|Formulor in Germany]] - for Acrylic\\
[[https://shop.frontpanels.de/custom-panels|frontpanels.de in germany]] my choose\\
[[https://thebeast.co.uk/2d/|The Beast - UK]]\\
[[https://www.schaeffer-ag.de/en/|Schaeffer-ag.de]]
\\ 
**Recommend Material**\\
3mm x 128.5 x 188.58 Aluminium, anodised\\


====== To Do ======
waiting for the PCBs and Panels... since the Panels are reverse - engineered - its praying for good luck!\\

====== Community users working on it ======
  * **[[Phatline]]** =  PCB & Shematic, Documentation...\\

Just let a Private message on the forum to user already involved.\\
MIDIbox

User Tools

Site Tools

Page Tools
