Differences

This shows you the differences between two versions of the page.

--- mb-sidr8tr [2011/01/23 16:27]
m00dawg created
+++ mb-sidr8tr [2011/01/24 05:24]
m00dawg Added Power board
@@ Line 27: / Line 27: @@
 ==== LED Matrix ====
-This is a proposed layout for an LED matrix board to be used coupled with the above panel design. While other boards can likely be made from home using various methods, it might be wise to have this one printed. Schematic and layout are below. Eagle files can be found {{:mb-6582r-led-matrix-eagle.zip|here}}. Note that this design currently has the mounting holes up higher than the current design of the front panel. The mounting holes were moved down on the panel so the design was more uniform. Modify per your needs!
+This is a proposed layout for an LED matrix board to be used coupled with the above panel design. While other boards can likely be made from home using various methods, it might be wise to have this one printed. Note that this design currently has the mounting holes up higher than the current design of the front panel. The mounting holes were moved down on the panel so the design was more uniform. Modify per your needs!
 {{:mb6582r-led-matrix-board.png?320}}
 {{:mb6582r-led-matrix-schematic.png?320}}
+{{:mb-6582r-led-matrix-eagle.zip|Eagle}}
+==== Power ====
+The power board supplies +/- 12V, +9V and +5V. +12V might be able to be used for a SID-6581 but the board is really optimized around suppling +9V (in other words, 8580/6852 SIDs). This board is based off [[northernlightx]]'s Complete PSU with a few modifications. The +/- 12V is for adding AOUT modules (namely for [[http://www.midibox.org/dokuwiki/doku.php?id=ssm2044_pcb|SSM 2044]] filters).
+{{:sidr8tr-power-board.png?320}}
+{{:sidr8tr-power-sch.png?320}}
+{{:sidr8tr-power.zip|}}
+===== Props =====
+Thanks to TK, Wilba, SmashTV, and nILS for their help, inventions, and support. Without them, this would not have been possible!

MIDIbox

User Tools

Site Tools

Differences

Page Tools