User Tools

Site Tools


mbhp_acronyms

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
mbhp_acronyms [2008/07/30 21:13]
127.0.0.1 external edit
mbhp_acronyms [2011/09/17 17:08] (current)
dougster
Line 1: Line 1:
 +
 +
 +
 \\ \\
 \\ \\
Line 5: Line 8:
  
 ^ Acronym ^ Meaning ^ Description ^ ^ Acronym ^ Meaning ^ Description ^
-| [[ain_module|AIN]] | Analog INput | Input of a Voltage Range (norm. 0 to 5 V) | +| [[ain_module|AIN]] | Analog INput | A module which accepts input of a Voltage Range (normally ​0 to +5 V) | 
-| [[aout_module|AOUT]] | Analog OUTput | Output of a Voltage Range (norm. 0 to 5 or 12 V) - also known as CV (Control Voltage) Outputs | +| [[aout_module|AOUT]] | Analog OUTput | A module which outputs ​a Voltage Range (norm. 0 to 5 or 12 V) - also known as CV (Control Voltage) Outputs ​|  
 +| [[dictionary:​Assembler|ASM]] | ASseMbly Language | |
 | [[BCD]] | Binary Coded Decimal | The three chars '​1','​2','​7'​ represent the BCD of the integer 127 |  | [[BCD]] | Binary Coded Decimal | The three chars '​1','​2','​7'​ represent the BCD of the integer 127 | 
 | [[Bankstick|BS]] ​ | BankStick | Non-volatile memory module based on the 24LC256 / 24LC512 EEPROM | | [[Bankstick|BS]] ​ | BankStick | Non-volatile memory module based on the 24LC256 / 24LC512 EEPROM |
Line 14: Line 18:
 | [[dout_module|DOUT]] | Digital OUTput | Binary state output (ON/OFF), normally used for LEDs |  | [[dout_module|DOUT]] | Digital OUTput | Binary state output (ON/OFF), normally used for LEDs | 
 | [[EEPROM]] | Electrically-Erasable Programmable Read-Only Memory ​ |  | | [[EEPROM]] | Electrically-Erasable Programmable Read-Only Memory ​ |  |
-| [[Encoders|ENC]] | ENCoder | Similar in operation to a Pot (potentiometer), ​Relative Digital Pot, in-/​decrementing single steps | +| [[Encoders|ENC]] | ENCoder | Similar in operation to a Pot (potentiometer), ​sometimes called a "​relative"​ or "​digital"​ pot, in-/​decrementing single steps | 
-|[[Gnd]]| GrouND | Negative Voltage eg: 0V Reference. See Vss|+| [[FIFO | First In First Out | A way of storing and retrieving from a stack of data]] 
 +|[[Gnd]]| GrouND | Common wiring point, typically a 0V Reference. See Vss|
 | [[lcd#​graphical_lcds|GLCD]] | Graphical Liquid Crystal Display | Pixel based Display (see also CLCD) | | [[lcd#​graphical_lcds|GLCD]] | Graphical Liquid Crystal Display | Pixel based Display (see also CLCD) |
 | [[HLP]] | HeLP / Higher Layer Protocol |  | | [[HLP]] | HeLP / Higher Layer Protocol |  |
mbhp_acronyms.1217452439.txt.gz · Last modified: 2009/03/08 04:19 (external edit)