Differences

This shows you the differences between two versions of the page.

--- mbqg_tb_case [2017/12/20 21:16]
smithy created
+++ mbqg_tb_case [2024/01/20 02:43] (current)
smithy
@@ Line 1: / Line 1: @@
 ===== MIDIbox Quad Genesis Case designed by Technobreath =====
+The case is designed by Technobreath to be easily replicated by the community without requiring much skills or tools.
 Here you will find a pdf with dimensions and building instructions for a wooden case designed for the MIDIbox Quad Genesis by user Technobreath:
-{{:building-instructions3.pdf|}}
+{{::building-instructions4.pdf|}}
+Please see this forum post in the Quad Genesis Build Guide Thread for further step by step instructions on how to build the case:
+http://midibox.org/forums/topic/20619-build-guide-midibox-quad-genesis/?do=findComment&comment=180084
+Huge thanks to Technobreath for taking the time to design this case!
+You will need 8 threaded inserts with an internal diameter of 3mm for use with [[http://midibox.org/forums/topic/19678-midibox-quad-genesis/?do=findComment&comment=200872|Smithy's PCB Front panel]]
+You can find these m3 threaded inserts with an external diameter of 5mm commonly on
+[[https://a.aliexpress.com/_ExA45x3|AliExpress]]
+The default wooden case thickness is 9mm.
+The 8 threaded inserts will need to be inserted to top of the wooden case.
+I recommend using a 4mm drill bit to drill the pilot holes and drilling a depth of 6mm.
+You can also use these threaded inserts in the base of the wooden enclosure to mount the PCBs.
-Huge thanks goes to Technobreath for taking the time to design this case!

MIDIbox

User Tools

Site Tools

Differences

Page Tools