MIDIbox

This is an old revision of the document!

MIDIBox AY 3 8912 - Controllers

CONTROLLER 01 - ENVELOPE SHAPE CONTROL:
Value 00-07 dec. ⇒ ENVELOPE SHAPE down
Value 08-15 dec. ⇒ ENVELOPE SHAPE up down
Value 16-23 dec. ⇒ ENVELOPE SHAPE down continue
Value 24-31 dec. ⇒ ENVELOPE SHAPE down continue2
Value 32-39 dec. ⇒ ENVELOPE SHAPE down up
Value 40-47 dec. ⇒ ENVELOPE SHAPE up continue
Value 48-55 dec. ⇒ ENVELOPE SHAPE up
Value 56-63 dec. ⇒ ENVELOPE SHAPE up continue2
See ENVELOPE SHAPE ⇒ http://www.midibox.org/dokuwiki/midibox_ay_3_8912_envelope
CONTROLLER 02 - GLOBAL ENVELOPE FINE 0-127 (128-255 with +128 OFFSET CC3)
CONTROLLER 03 - GLOBAL ENVELOPE FINE +128 OFFSET (Value 0 ⇒ NO OFFSET, Value 1-128 ⇒ OFFSET +128)
CONTROLLER 04 - GLOBAL ENVELOPE COARSE 0-127 (128-255 with +128 OFFSET CC5)
CONTROLLER 05 - GLOBAL ENVELOPE COARSE +128 OFFSET (Value 0 ⇒ NO OFFSET, Value 1-128 ⇒ OFFSET +128)
CONTROLLER 06 - GLOBAL NOISE PERIOD (Value 0-127 ⇒ 0-31 NIOSE PERIOD)
CONTROLLER 07 - VOLUME A (Value 0-127 ⇒ 0-15 VOLUME)
CONTROLLER 08 - VOLUME B (Value 0-127 ⇒ 0-15 VOLUME)
CONTROLLER 09 - VOLUME C (Value 0-127 ⇒ 0-15 VOLUME)
CONTROLLER 10 - Value 1-127 = Tone A ON / Value 0 = Tone A OFF
CONTROLLER 11 - Value 1-127 = Tone B ON / Value 0 = Tone B OFF
CONTROLLER 12 - Value 1-127 = Tone C ON / Value 0 = Tone C OFF
CONTROLLER 13 - Value 1-127 = Noise A ON / Value 0 = Noise A OFF
CONTROLLER 14 - Value 1-127 = Noise B ON / Value 0 = Noise B OFF
CONTROLLER 15 - Value 1-127 = Noise C ON / Value 0 = Noise C OFF
CONTROLLER 16 - Value “Envelope Mode” Tone A on/off - Value 0 = OFF / Value 1-127 = ON
CONTROLLER 17 - Value “Envelope Mode” Tone B on/off - Value 0 = OFF / Value 1-127 = ON
CONTROLLER 18 - Value “Envelope Mode” Tone C on/off - Value 0 = OFF / Value 1-127 = ON
CONTROLLER 19 - Value “Velocity Mode” Tone A on/off - Value 0 = OFF / Value 1-127 = ON
CONTROLLER 20 - Value “Velocity Mode” Tone B on/off - Value 0 = OFF / Value 1-127 = ON
CONTROLLER 21 - Value “Velocity Mode” Tone C on/off - Value 0 = OFF / Value 1-127 = ON
CONTROLLER 22 - Value “Noise Period to Velocity” ON/OFF
Value 0 ⇒ “Velocity to Noise Period” = OFF
Value 1 ⇒ “Velocity to Noise Period” = ON [Take Velocity from MIDI Channel TONE A]
Value 2 ⇒ “Velocity to Noise Period” = ON [Take Velocity from MIDI Channel TONE B]
Value 3 ⇒ “Velocity to Noise Period” = ON [Take Velocity from MIDI Channel TONE C]
Value > 3 ⇒ NOT effective
Note: CC22 is effective on the MIDI Channel of Tone A or B or C

-.-

(MIDIBox AY 8912 V0.04b, 28.11.2008)

More to come…