MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**MIDIBox CV**\\
a MIDI-to-control voltage converter project

=====MBHP Hardware Requirements=====

1 CORE module, 1 analog output module (AOUT, AOUT_LC, or AOUT_NG), 1 DINX1 module.

Recommended:  LCD, BankStick.

=====Documentation=====

  * [[http://www.ucapps.de/midibox_cv.html|MIDIbox CV]] <sup>uCApps</sup>

=====Links=====

  * [[How to use MIDIbox CV with a dout]]
  * [[How to use MIDIbox CV with a dout GERMAN]]
  * [[http://www.midibox.org/forum/index.php?topic=10412.msg78685#msg78685|How to use an encoder and up/down buttons on the same MIDIbox CV]] <sup>Forum</sup>

=====Proposals for additional functions in future firmware versions=====

(Please add your ideas here:)

   * One Page Up, one Page Down button should replace the Select button for faster selection of CV output
   * variable pulselength of gate outs depending on velocity
   * Use individual CV-Outs for dynamic (eg velocity dependant) triggers or gates
   * Adress note on to different trigger outs, depending on "velocity zones", eg to turn on accent or glide by velocity       
   * Save different settings
   * "Rotate" note assignment in Poly mode (select "four voices" for example, then outputs 1-4 will rotate, advancing always with the next note. "Random" would also be nice. See: Oberheim 4-Voice.)
   * Vibrato LFO. Freerunning LFO summed into oscillator note output, amount controlled by Mod Wheel or Aftertouch, amount= zero to a user-selected maximum. In addition to existing note/pitch wheel summing. 
   * Support for realtime, encoder control of DIN Sync clock value (4 bars, 2 bars...1/4 notes, 1/4 note triplets, up to the maximum. See: Flame Clockwork. MIDI synch of LFO via this control would be wonderful.
MIDIbox

User Tools

Site Tools

Page Tools
