Differences

This shows you the differences between two versions of the page.

--- pedal_box [2010/04/13 08:28] – durisian
+++ pedal_box [2014/01/19 10:10] (current) – shuriken
@@ Line 192: / Line 192: @@
 [[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Fdocs%2FPB_Manual.pdf|The Complete Usage Manual]]
-Help can be found in the [[http://www.midibox.org/forum/index.php/topic,9770.30.html | Pedal Box forum thread ]]
+Help can be found in the [[http://midibox.org/forums/topic/9081-the-pedal-box-and-pedal-board-thread | Pedal Box forum thread ]]
  \\
@@ Line 412: / Line 412: @@
 <box 46% left round bluedark|Device Bankstick Downloads>
-[[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2FDevice_Config_Files%2FV-Amp%2FV-Amp.zip|Behringer V-Amp Series]]
+{{:mcrozier:v-amp.zip|Behringer V-Amp Series}}
 </box> \\
 <box 46% left round|PC Editor>
-[[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Feditor%2Fv2%2FPBEditor2.zip|Pedal Board Editor 2 v1.0]] \\
+{{:mcrozier:pbeditor2.zip|Pedal Board Editor 2 v1.0}} \\
 Please note the editor requires a minimum of WinXP with .Net 3.5 \\
 </box>
 <box 98% round|Docs>
-[[http://svnmios.midibox.org/filedetails.php?repname=svn.mios&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fpedalbox_v2%2Fdocs%2FPB_Manual.pdf|The Complete Usage Manual]]
+{{:mcrozier:pb_manual.pdf|The Complete Usage Manual}}</box>
-</box>
 ----
@@ Line 452: / Line 451: @@
-Please report bugs in the [[http://www.midibox.org/forum/index.php/topic,9770.30.html | Pedal Box forum thread ]]
+Please report bugs in the [[http://midibox.org/forums/topic/9081-the-pedal-box-and-pedal-board-thread | Pedal Box forum thread ]]
@@ Line 611: / Line 610: @@
 The shift register of the 1st digit (the one's display) must be defined in pbx_config.h \\
 The second digit (ten's) will be automatically assigned to the next shift register.
+If only 1 digit is used, and bank goes higher than 9. The dot will light up to let you know that '0' is actually 10, '1' is actually 11, etc \\
 In place of LED digits. A 2x20 LCD Display can be used (instead of 2x16). The last 4 charcters of each line are used for bank display. This will only happen when DIGITS_CONNECTED = 0 in pbx_config.h.
@@ Line 640: / Line 641: @@
 {{http://www.durisian.com/midibox/PB/images/pbd_din_dout_connections.jpg}}
-**Pleas Note:** Default connections have changed since 2.6. The default has only one digit connected to SR 5. With bank and PedalSwap footswitches and LED's attched to SR 4
+**Please Note:** Default connections have changed since 2.6. The default has only one digit connected to SR 5. With bank and PedalSwap footswitches and LED's attched to SR 4
@@ Line 654: / Line 655: @@
 I only built Pedal Box, so I use the Behringer FCV100 Foot Pedal in CV mode. But here's some links that came up on the forum.
-  * [[http://www.banzaieffects.com/Pushbutton-Footswitches-Momentary-c-333.html | Banzai Effects]] stock a good range of momentary footswitches - perfect for this project
+  * [[http://www.banzaimusic.com/Pushbutton-Footswitches-Momentary | Banzai Effects]] stock a good range of momentary footswitches - perfect for this project
   * [[http://www.smallbearelec.com/|Small Bear Electronics]] Specializes in DIY guitar sound effects
   * stryd_one offered this google search for momentary footswitches. [[http://www.google.com.au/search?safe=off&q=momentary+SPST+footswitch]]
@@ Line 685: / Line 686: @@
 {{mcrozier:pedal_board_max.jpg}}  \\
 You know you want to build it!