MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Switch ======

===== Introduction =====

A switch is a small lever or button. It's an electrical device having at least **two states**, ON (the closed state) or OFF (the open state). 

Ideally, a switch device has zero impedance when closed and infinite impedance when open. The switches on the back of printers and on expansion boards are called DIP switches. 

A switch that has just two positions is called a toggle switch.A "click switch" is called SPST switch.

{{ ::neonking:switches.jpg?direct |}}

===== Some Refs? =====

There is thousands of switches, describing them here would be impossible.
 
You should have a look to <wrap info>[[parts_faq#what_kind_of_switches_do_i_need|Switch Choosing Guide]]</wrap>

===== DIN Connection =====

{{ :neonking:encoder-switch-din.jpg?direct&600 |}}
\\
\\
==== Matrix Design ====
{{ :neonking:switchmatrix.jpg?direct&800 |}}

MIDIbox

User Tools

Site Tools

Page Tools