Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 40 Hits
- ons (like Pitch, Delay and Probability) only this way, as they won't be available in any of the presets... ect layer A with GPK9. Then turn GPK11–13 all the way to the left to choose CC number 001, and then con... veral physical ports (e.g. OUT1 and OUT2) offer a way out: you could have two tracks sending data on th... diplays). Punching in the letters works the same way as writing an SMS on a mobile phone.//\\
>>>//One
- protodeck: 12 Hits
- r to be focused on music/sound/live.\\
The only way to solve my problem was to use an hardware to con... scovering the name could be ... right.\\
By the way, a lot of deck are named like that. But it could ... en if he wouldn't be moved by that :-)\\
By the way (bis), he congratulates me about the hardware. An... \
The LCD will be involved in this multipurpose way: it could give a feedback of master volume, showi
- wickedblade: 7 Hits
- ck electric guitar player and I was looking for a way to interface my gear together. Since I've done a couple DIY stompboxes, going the DIY way was an option. And since I couldn't find anything...
NOTE: I think I read somewhere that there was a way to avoid the clicking sound when a relay is switc... for loop returns - e.g. Switchcraft 12A (offers a way to connect to ground or input signal if no jack i
- stuartm_stukontrol: 7 Hits
- ive in Session View to "perform" tracks in a live way.
This first approach was with the Evolution UC-33... ot the idea to control the track in a more global way (different parts, breakdowns, drum rolls etc.)
Ho... lly satisfying, as i couldn't figure out a proper way to trigger the clips in each channel.
Also, the U... rews in the front panel, but I decided to go this way as it was the easiest solution for me then.
Howev
- wilba_mb_6582_base_pcb_construction_guide: 6 Hits
- things together and how to test things along the way. If you want more information about how it works,... ions as the PCB, and that you put it in the right way.
The bridge rectifier I use is generally identif... oo much current through the LEDs and they will be way too bright. Unless you want to use your control s... some other resistor values. I discovered the hard way that the 220 Ohm resistors were way too bright wi
- korg_wavedrum_midification: 5 Hits
- ing also samples are used. Still, the //WD-X// is way less expensive than its predecessor. In the follo... sockets (similar to DIL IC sockets) instead. This way it is easier to find the proper values.
{{:waved... be viewed. Here are a few examples recorded this way:
{{:wavedrum_midi:waveform_head_fingertips.jpg?2... hand), and when it's hit closer to the rim. This way a crude position detection is possible.\\
Only th
- pedal_box:pc_editor_manual: 5 Hits
- nting some of the things I have learned along the way right from the start, rather than hacking them in place. But thats a long way off yet!
15/12/09 -
A new PC Editor is on the way (written in VB - I know, I know, but it's so much ... =====
=====Overview=====
PBPCE provides a simple way to get information about your midi setup and sett
- windows_toolchain_svn: 5 Hits
- new/edited code to the server. It's just an easy way to look at the existing code.
* [[#tortoisesvn... ==
\\
\\
This step is not required, but is a good way to check that your session is setup correctly and... ing the normal login process, and personally I am way too lazy for that ;) If you're lazy too (or maybe... ant ===
\\
\\
This step is not required, but is a way to test that Pageant, your PuTTY session, and you
- frequently_asked_questions_faq: 5 Hits
- a varying voltage to indicate their position. One way to explain them is using the analogy of two butto... you can test them with a multimeter. At the half way point, a 10K linear pot will measure 5K ohms. At the half way point, a logarithmic pot will either measure 6.5K... worked with 8051 derivatives. Sometime along the way I decided to use a PIC controller because it *was
- ssm2044_pcb: 5 Hits
- ust want to point out that these are not the only way to get a good sound :) - in general, it's a good ... n't able to reach self-oscillation (or it sets in way too early), you can compensate by using a differe... his behaviour might seem a bit uncommon, but that way you can connect the pin to one of the gate out pi... down. For a start, now adjust these trimmers in a way that min. cutoff will set the cutoff very low and
- wilba_mb_6582_control_surface_construction_guide: 4 Hits
- he insulation, towards the ribbed side.
The best way to strip the insulation from the wires is to **li... core with a knife on the flat side, i.e. cut half-way through the insulation, **not** cutting to the wi... do is cut, scratch, dent, damage the wire in any way, because if you do, the wire will break when bend... e solder joints or the exposed wire.
The easiest way to solder the cables:
Place CS PCB face up, turn
- apparat_20_construction_blog: 4 Hits
- ere's no need for rectifier, regulator etc.. That way there was enough unused space on the PCB that I c... nectors for 5V, GND and +/-12V on the board. This way the output headroom will be just a bit higher.
{... gain with one button press. When used "the normal way", this is no big problem because you check the by... The LED is part of a matrix so there´s no simple way to measure on and off.\\
So I decided to do it in
- wilba_mb_6582: 4 Hits
- sure. This dude's MIDIbox SID is a DIY synth the way that an Aston Martin Vanquish is a car. I mean, l... PLED display like in the original MB-6582, so the way I mounted the display between the PCB and panel c... the base PCB (i.e. JD1 to JD4) as per the normal way of connecting rotary encoders to DIN modules. Jus... s would approximate turning the trimpot fully one way and at least let the LCD display something when c
- wilba_mb_6582_prototype: 4 Hits
- design of MIDIbox. I am glad I did it the modular way first, as I learned a lot about how it all fits t... t through a pot into SID input), I wanted an easy way to toggle filtering of external in.
Missing "O3"... og pots, which attenuate the SID audio out on its way back into the SID. These can give effects like a ... ey're log pots, so I still have to work out which way round they should go!
Fan hole: I'm sticking a 4
- midibox_audiomatrix: 4 Hits
- layout_improvements: 3 Hits
- pga:purpose: 3 Hits
- home:project:mb808: 3 Hits
- pad_4_4: 3 Hits
- c_from_first_principles: 3 Hits
- tos_-_a_tds_controller_blog: 3 Hits
- mb808: 3 Hits
- midiboxfx_-_midifiying_analog_gear: 3 Hits
- home:about:midibox: 3 Hits
- home:skills:soldering: 3 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 3 Hits
- soldering: 3 Hits
- howto:dev:libcan: 3 Hits
- ain_4: 3 Hits
- gm5x5x5_errata: 2 Hits
- forum_netiquette: 2 Hits
- pcb: 2 Hits
- installing_gputils_and_sdcc_on_osx: 2 Hits
- legacy: 2 Hits
- pga:configmixer: 2 Hits
- dcb: 2 Hits
- mbqg_fp: 2 Hits
- home:skills:etching_pcbs: 2 Hits
- midibox_sid_faq: 2 Hits
- windows_mios32_toolchain_core: 2 Hits
- midiboxdmx: 2 Hits
- what_is_a_midibox: 2 Hits
- midi_specification: 2 Hits
- home:skills:constructing_enclosures: 2 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 2 Hits
- opl3_module_modified: 2 Hits
- user_contest2007: 2 Hits
- macos_mios32_toolchain_core: 2 Hits
- introduction_to_ucapps.de: 2 Hits
- windows_toolchain_core: 2 Hits
- pga:choices: 2 Hits
- howto_create_a_pcb_english_german: 2 Hits
- pga:postconfigsoftware: 2 Hits
- pedal_box:manual: 2 Hits
- using_pic18f4620: 2 Hits
- home:project:midi_mapper: 2 Hits
- troubleshooting: 2 Hits
- triggermatrix: 2 Hits
- mcan: 2 Hits
- wiki:welcome: 2 Hits
- mididocs:seq:blm16x16_build_guide: 2 Hits
- seqv4plus_beat_led: 2 Hits
- mb-sidr8tr:start: 2 Hits
- eclipse: 1 Hits
- questionable: 1 Hits
- waldorf_knobs_bulk_order_fall_2013: 1 Hits
- waldorf_knobs_bulk_order_spring_2014: 1 Hits
- display_driver: 1 Hits
- aout_ng: 1 Hits
- cs1: 1 Hits
- home:mbhp:module:lcd: 1 Hits
- msq-cc-bcr: 1 Hits
- waldorf_knobs_bulk_order_2013: 1 Hits
- mbhp_acronyms: 1 Hits
- mididocs:seq:building: 1 Hits
- flo: 1 Hits
- midibox_speakjet_k64_modul: 1 Hits
- upgrade_cs_step_a_mbsidv1_to_have_shift_function_on_menu_button: 1 Hits
- midibox_quad_genesis: 1 Hits
- pga:buildoutbrd: 1 Hits
- pga:softwareoverview: 1 Hits
- midibox_ay_patch_menu: 1 Hits
- dictionary:bi-directional: 1 Hits
- home:mbhp:module:din: 1 Hits
- dictionary:boolean: 1 Hits
- pga:buildregbrd: 1 Hits
- mb_rgb-led_matrix_8x8: 1 Hits
- mbhp: 1 Hits
- wcoref4_pcb: 1 Hits
- seqv4plus_le_mec: 1 Hits
- velocity_converter: 1 Hits
- midiboxmixer: 1 Hits
- pedal_box: 1 Hits
- msq-cc-lre-v2: 1 Hits
- midiboxkb_-_using_a_c64_keyboard_as_input: 1 Hits
- phatline: 1 Hits
- coilwinder: 1 Hits
- cubase: 1 Hits
- windows_toolchain_quickstart: 1 Hits
- 16x4blm_pcb: 1 Hits
- wikify: 1 Hits
- msq-cc-lre: 1 Hits
- euro-midi-io: 1 Hits
- mc_protocol_mappings: 1 Hits
- euro-aout-ng-connector-board: 1 Hits
- midibox_master_keys: 1 Hits
- fnp-sid: 1 Hits
- midibox_tia: 1 Hits
- mb_olre16: 1 Hits
- wilba_mb_6582_control_surface_parts_list: 1 Hits
- windows_toolchain_codeblocks: 1 Hits
- seqv4plus_enc-plate: 1 Hits
- wcore_line-transmit: 1 Hits
- mb-lre8x2cs_pcb_bulk_order: 1 Hits
- wcore_midi8: 1 Hits
- bipolar_12v_psu: 1 Hits
- mb-lre8x2cs_rev4.6: 1 Hits
- sync_4_newbies: 1 Hits
- trsequencer: 1 Hits
- seq_v4l_mk._ii: 1 Hits
- mididocs:seq:usingblm: 1 Hits
- encoders: 1 Hits
- rf: 1 Hits
- troubleshooting_lcd_displays: 1 Hits
- waldorf_knobs_bulk_order_april_2013: 1 Hits
- arkade: 1 Hits
- digital: 1 Hits
- encyclopedia_syntax: 1 Hits
- wild_weasel: 1 Hits
- frailn_ay-3-8912_mini_sale: 1 Hits
- scratchcontroller: 1 Hits
- i_o: 1 Hits
- irq_interrupt_request: 1 Hits
- pci: 1 Hits
- q: 1 Hits
- relay: 1 Hits
- rg-8: 1 Hits
- midibox: 1 Hits
- rms: 1 Hits
- wilba_albs_waldorf_knob_mega_sale: 1 Hits
- home:skills:troubleshooting:hardware: 1 Hits
- mididocs:index: 1 Hits
- mididoc:midibox_kb: 1 Hits
- home:project:midibox_sid_v1_manual: 1 Hits
- chaos_matrix: 1 Hits
- stryd_one_preparation: 1 Hits
- introduction_to_midi: 1 Hits
- where_to_order_components: 1 Hits
- crystals_and_oscillators: 1 Hits
- mb-lre8x2cs_pcb: 1 Hits
- home:project:midibox_sid:v1_manual: 1 Hits
- freecad: 1 Hits
- pga:patches: 1 Hits
- dougwellington_mb6582_panels: 1 Hits
- midibox_sid_v1_manual: 1 Hits
- seq_c64_keyboard_mod: 1 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 1 Hits
- home:mbhp:parts: 1 Hits
- home:skills:troubleshooting: 1 Hits
- audiocommander: 1 Hits
- best_recycled_midibox: 1 Hits
- midibox_pokey_2: 1 Hits
- dseq_bs: 1 Hits
- adding_buttons_for_bankstick_switching: 1 Hits
- easy_cv: 1 Hits
- etching_pcb: 1 Hits
- dictionary:4-bit_mode: 1 Hits
- gm5x5x5_-_allied_parts_list: 1 Hits
- home:software:windows:cadsoft_eagle: 1 Hits
- ucdocabstract: 1 Hits
- pga:midichart: 1 Hits
- checksum: 1 Hits
- home:software:picasm: 1 Hits
- button_overlay: 1 Hits
- dougwellington_transformer_bulk_order: 1 Hits
- electronics_basics: 1 Hits
- best_documentation_effort_and_howto_for_total_newbies: 1 Hits
- changing_din_pins: 1 Hits
- changing_dout_pins: 1 Hits
- forum_highlights_huis: 1 Hits
- ltc_module: 1 Hits
- lcd: 1 Hits
- component: 1 Hits
- change_id: 1 Hits
- howto:dev:autotools-skeleton: 1 Hits