Differences

This shows you the differences between two versions of the page.

--- tm5-dindoutgate [2022/12/26 14:18] – created phatline
+++ tm5-dindoutgate [2022/12/28 18:41] – [Building and BOM] phatline
@@ Line 3: / Line 3: @@
 {{:phatline:TM5-DINDOUTGate-3D-Back.jpg?600|}}\\
-this is one essential part for my [[triggermatrix5]]\\
+\\
-it gives 24 Digital Inputs, and 32 Digital Outputs, while 16 Outputs are used for UI, the othere 16 are buffered, and are for use as 16 GAte/Triggger output at 5V Level\\
+**it gives;**\\
-i created this board. its fully SMD, and made it pick and place ready - so no soldering required!\\
+Digital Inputs\\
+Digital Outputs\\
+* while 16 Outputs are used for UI\\
+* the other 16 are buffered, and are for use as 16 GAte/Triggger output at 5V Level\\
+\\
+The Board is fully SMD, and made for pick and place - so no soldering required!\\
 ====== Shematic ======
-{{:phatline:TM5-DINDOUTGate-schema.jpg?600|}}\\
+{{:phatline:TM5-DINDOUTGate-schema.jpg?900|}}\\
 ====== Building and BOM======
-Its build by pick and place robots... so no need to build\\
+Its build by pick and place robots... so no need to build, or order any component\\
+you need this PCB 1x for [[triggermatrix5]]\\
 ===== BOM =====
+Follwing list is for reference, and debugging only, no need to order them! all the parts are already soldered on the PCB!\\
 ^qty		^reference		^value		^footprint		^jlc^
-|	18	|	C1 – C12, Ca3, Ca4, Ca5, Cb3, Cb4, Cb5, Cb6|	100n	|	C_0402	|	C307331	|
+|	18	|	C1 – C12, Ca3, Ca4, Ca5, Cb3, Cb4, Cb5, Cb6	|	100n	|	C_0402	|	C307331	|
-|	5	|	C9, Ca1, Ca2, Cb1, Cb2|	10uF	|	C0805	|	C440198	|
+|	5	|	C9, Ca1, Ca2, Cb1, Cb2	|	10uF	|	C0805	|	C440198	|
-|	5	|	DIN1, DIN2, DIN3, Gate1, Gate2, Gates	|	Pin-Head-10-SMD	C124391	|
+|	5	|	DIN1, DIN2, DIN3, Gate1, Gate2	|	Gates	|	Pin-Head-10-SMD	|	C124391	|
-|	4	|	DOUT1, DOUT2, Jin8/1, Jout8/9	DIN/DOUT	|	Pin-Head-10-SMD	C124391	|
+|	4	|	DOUT1, DOUT2, Jin8/1, Jout8/9	|	DIN/DOUT	|	Pin-Head-10-SMD	|	C124391	|
 |	4	|	IC1, IC2, IC3, IC4	|	74HC595-bigger	|	HC595-smd	|	C5947	|
 |	3	|	IC5, IC6, IC7	|	74HC165-bigger	|	HC165-smd	|	C5613	|
-|	1	|	LED1	|	LED	LED-0603	|	C2286	|
+|	1	|	LED1	|	LED	|	LED-0603	|	C2286	|
-|	16	|	Q1 – Q16	|	MMBT3904-7-F	MMBT3904-7-F	|	C20526	|
+|	16	|	Q1 – Q16	|	MMBT3904-7-F	|	MMBT3904-7-F	|	C20526	|
-|	16	|	R1 – R16	|	220	R_0805	|	C25294	|
+|	16	|	R1 – R16	|	220	|	R_0805	|	C25294	|
-|	42	|	R17 – R74	|	10K	R_0402	|	C25744	|
+|	42	|	R17 – R74	|	10K	|	R_0402	|	C25744	|
-|	16	|	R33 – R48	|	10K	R_1206	|	C17902	|
+|	16	|	R33 – R48	|	10K	|	R_1206	|	C17902	|
-|	2	|	R75, R76	|	220	R_0402	|	C25091	|
+|	2	|	R75, R76	|	220	|	R_0402	|	C25091	|
+{{:phatline:TM5-DINDOUTGate-PCB.jpg?800|}}\\
-{{:phatline:TM5-DINDOUTGate-PCB.jpg?600|}}\\
 ====== To Do ======
 waiting for the assembled Prototype\\