Differences

This shows you the differences between two versions of the page.

--- core4disc [2022/12/29 12:16] – [Order-List] phatline
+++ core4disc [2023/02/12 13:42] (current) – [Software] phatline
@@ Line 13: / Line 13: @@
 {{:phatline:Core4Disc-shematic.jpg?600|}}\\
+i think there is a error - PB2 is not connected to the CORE MODULE FIXME
 ====== Building and BOM======
 parts off it is pick and place the other part is handsolder\\
@@ Line 76: / Line 77: @@
 {{:phatline:Core4Disc-board.jpg?600|}}\\
+====== Software ======
+. If the Discoveryboard is a virgin-one then upload the bootloader [[http://www.ucapps.de/mios32_bootstrap_experts.html|via stm-utility]]\\
+. Upload the [[http://www.ucapps.de/mios32/mios32_bootloader_v1_018.zip|Bootloader]]\\
+. Disconnect and Reconnect the USB-Cable to your PC, then type "help" into the MIOS-Terminal, this should print out the actual Board-Configuration, if this happens then:
+. Type following commands:\\
+<code>
+set lcd_type 0x84
+set lcd_num_x 26
+set lcd_num_y 1
+set lcd_width 128
+set lcd_height 64
+store
+</code>
+at least this has to be done when using this core for [[Triggermatrix5]]\\
 ====== To Do ======
-waiting for the assembled Prototype\\
+It works! next variant will be, without Discoveryboard and the STM32F407vgt6 directly soldered to the board...\\
 ====== Community users working on it ======