MIDIbox

User Tools

Site Tools

Trace:
fadercore_-_vlr-8enc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
fadercore_-_vlr-8enc [2014/07/26 14:28] – novskifadercore_-_vlr-8enc [2014/07/27 21:23] (current) – novski
Line 1: Line 1:
-====== Fadercore ======+[[fadercore_-_fadermodule_for_audio_daw|Fadercore]]
  
 Standard 220mm wide modules  Standard 220mm wide modules 
Line 17: Line 17:
  
 ==== BOM ==== ==== BOM ====
-BIll of Material +BIll of Material         
- +
-Qty Value         Device                    Package             +
-2                 ML10                      ML10                  +
-2                 ULN2803SO18W              SO18W                                                                                              +
-3   100n          C-EU025-024X044           C025-024X044                                  +
-6   100nF         C-EU025-024X044           C025-024X044                                  +
-6   10k           4306R                     SIL6                                                                             +
-4   220           4816P-1SOIC16W            SOIC16W                                                                                      +
-3   220           R-EU_0204/7               0204/7                                                                                                                +
-3   74HC165N      74HC165NSO16D             SO16D                                                                                             +
-3   74HC595       74HC595SO16D              SO16D                                                                                           +
-8   BOURNS_PEL12T BOURNS_PEL12T_11-LED-RING PEL12T_11-LED-RING                                                      +
-3   TPIC6B595     TPIC6B595SO20W            SO20W    +
  
 Allways look for the cheapest seller, the Price may vary heavy!!! Allways look for the cheapest seller, the Price may vary heavy!!!
Line 38: Line 25:
  
 I was fascinated about the RGB Shaft of this Encoder so i developed all opon this nice piece. I was fascinated about the RGB Shaft of this Encoder so i developed all opon this nice piece.
-Its not the cheapest but i sell them for a reasonable price. +Its not the cheapest but i sell them for a reasonable price. 
 +  
 +**And its still possible to use a non Illuminated Encoder.**
  
 == The other Materials: Mouser == == The other Materials: Mouser ==
  
-  * 2x10pin Header, 517-30310-6002 +  * 2x10pin Header, 517-30310-6002             
-  * 1xResistor Array 220Ohm SMD,  +  * 2xULN2803, 595-ULN2803ADWR                                                                                                        
-  * 1x74HC595 SMD,  +  * 9x100nF,594-K104K15X7RF53K2  
-  * 2x100nF, +  * 6x10k, 774-77061103P         
 +  * 4x220, 652-4816P-T1LF-220                          
 +  * 3x220, 660-MF1/2LCT52R221J                                                                    
 +  * 3x74HC165D, 771-HC165D652 
 +  * 3x74HC595D, 771-74HC595D                                                  
 +  * 3xTPIC6B595, because the MOQ is 250 i deliver them for you with the PCB. 
 +  * 88xLED RED, 604-WP3A8HD 
 +  * 88xLED holder 6mm Height, 749-ELM-5-6MM
  
-Project Order Basket on Mouser: [[]]+Project Order Basket on Mouser: [[http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=a6dbae9ab7]] 
 + 
 +The PCB is available under: [[http://vlrlab.com/lang/17-8enc.html]] 
 + 
 +  * 8 Encoder, 652-PEL12T4226FS1024 **not on Projectlist because i deliver cheaper and with cap included..** 
 +The Encoder on VLRlabs.com [[https://www.vlrlab.com/encoder/13-bourns-rgb-led-encoder.html]]
  
-The PCB is available under: [[https://vlrlab.com/pcb/10-8-odisplay.html]] 
  
 ==== How to get Started ==== ==== How to get Started ====
  
 +If its your first SMD soldering you can follow this on t1:58 : http://www.youtube.com/watch?v=5uiroWBkdFY
 +I recommend to not buy solder paste, instead buy some flux-paste like this on Mouser: 590-8341-10ML
  
 ==== Prepare the PCB ==== ==== Prepare the PCB ====
 +Start with the SMD parts and then go on the the conventional parts also on the Bottom side. Don't forget the R11,12,13. 
 +Then go on with the Topside and the LEDs before soldering the Encoder as last. 
 +Check the Connections with a Lens.
  
 ==== Prepare the Connection ==== ==== Prepare the Connection ====
  
 +Connect the core on J8/9 to J1 of the VLR-8Enc board.
  
 ==== Test it in MIOS ==== ==== Test it in MIOS ====
 +
 +To make it work with MIOS .NGC  File we need to know how the shift-registers are connected.
 +
 +**Inputs:**\\
 +1# Encoder         1-4\\
 +2# Encoder         5-8\\
 +3# Encoder Button  1-8\\
 +
 +**Outputs:**\\
 +1# RED Shaft LED   1-8\\
 +2# GREEN shaft LED 1-8\\
 +3# BLUE shaft LED  1-8\\
 +4# LED Ring Row    1-8\\
 +5# LED Ring Selct  1-8\\
 +6# LED Ring Select 9-11\\
 +
 +Assuming that the VLR-8Enc is the first device on the chain of J8/9 we need to configure it like this:
 +\\
 +RESET_HW\\
 +\\
 +LCD "%C"\\
 +\\
 +# Encoder configuration\\
 +\\
 +ENC n=  1   sr=1 pins=0:1   type=detented2\\
 +ENC n=  2   sr=1 pins=2:3   type=detented2\\
 +ENC n=  3   sr=1 pins=4:5   type=detented2\\
 +ENC n=  4   sr=1 pins=6:7   type=detented2\\
 +ENC n=  5   sr=2 pins=0:1   type=detented2\\
 +ENC n=  6   sr=2 pins=2:3   type=detented2\\
 +ENC n=  7   sr=2 pins=4:5   type=detented2\\
 +ENC n=  8   sr=2 pins=6:7   type=detented2\\
 +\\
 +# LEDring configuration\\
 +DOUT_MATRIX n= 1  rows=16 mirrored_row=0 inverted_sel=1 sr_dout_sel1= 4  sr_dout_sel2= 0 sr_dout_r1= 5 sr_dout_r2= 6\\
 +\\
 +# Encoder events\\
 +EVENT_ENC id= 1  fwd_id=LED_MATRIX:1   type=CC chn= 1 cc= 24  lcd_pos=1:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 2  fwd_id=LED_MATRIX:2   type=CC chn= 1 cc= 25  lcd_pos=2:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 3  fwd_id=LED_MATRIX:3   type=CC chn= 1 cc= 26  lcd_pos=3:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 4  fwd_id=LED_MATRIX:4   type=CC chn= 1 cc= 27  lcd_pos=4:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 5  fwd_id=LED_MATRIX:5   type=CC chn= 1 cc= 28  lcd_pos=5:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 6  fwd_id=LED_MATRIX:6   type=CC chn= 1 cc= 29  lcd_pos=6:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 7  fwd_id=LED_MATRIX:7   type=CC chn= 1 cc= 30  lcd_pos=7:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 8  fwd_id=LED_MATRIX:8   type=CC chn= 1 cc= 31  lcd_pos=8:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +\\
 +# Encoder Buttons\\
 +\\
 +EVENT_BUTTON   id=117     hw_id=17   fwd_id=LED:8  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=117     hw_id=17   fwd_id=LED:16 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=117     hw_id=17   fwd_id=LED:24 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=118     hw_id=18   fwd_id=LED:7  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=118     hw_id=18   fwd_id=LED:15 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=118     hw_id=18   fwd_id=LED:23 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=119     hw_id=19   fwd_id=LED:6  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=119     hw_id=19   fwd_id=LED:14 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=119     hw_id=19   fwd_id=LED:22 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=120     hw_id=20   fwd_id=LED:5  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=4:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=120     hw_id=20   fwd_id=LED:13 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=4:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=120     hw_id=20   fwd_id=LED:21 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=4:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=121     hw_id=21   fwd_id=LED:4  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=5:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=121     hw_id=21   fwd_id=LED:12 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=5:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=121     hw_id=21   fwd_id=LED:20 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=5:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=122     hw_id=22   fwd_id=LED:3  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=6:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=122     hw_id=22   fwd_id=LED:11 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=6:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=122     hw_id=22   fwd_id=LED:19 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=6:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=123     hw_id=23   fwd_id=LED:2  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=7:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=123     hw_id=23   fwd_id=LED:10 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=7:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=123     hw_id=23   fwd_id=LED:18 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=7:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=124     hw_id=24   fwd_id=LED:1  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=8:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=124     hw_id=24   fwd_id=LED:9  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=8:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=124     hw_id=24   fwd_id=LED:17 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=8:1:5 label="B^std_btn"\\
 +\\
 +LED_MATRIX_PATTERN n=2  pos= 0  pattern=1111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 1  pattern=0111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 2  pattern=0011110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 3  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 4  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 5  pattern=0000110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 6  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= M  pattern=0000111000010000\\
 +LED_MATRIX_PATTERN n=2  pos= 8  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 9  pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=10  pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=11  pattern=0000011100000000\\
 +LED_MATRIX_PATTERN n=2  pos=12  pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=13  pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=14  pattern=0000011111000000\\
 +
 +Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... lcd_pos=6:1:5 {6=Display number : 1= X-axis : 5= Y-Axis (row)}
fadercore_-_vlr-8enc.1406384891.txt.gz · Last modified: 2014/07/26 14:28 by novski