MIDIbox

User Tools

Site Tools

Trace: • pickit2 • midibox_sd_card_sample_player • jack • midibox_sid_faq • envelope-follower-bissel-based • audio_synthesis_integrated_circuit • knobs • modules_and_parts
m00dawg

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
m00dawg [2011/01/05 23:48] – m00dawgm00dawg [2011/11/30 02:26] (current) – old revision restored (spam kill) smashtv
Line 1: Line 1:
 +====== m00dawg's MidiBox Projects ======
 +
 Yo MidiBox Peeps! Yo MidiBox Peeps!
  
 I just started working on this page, but it will be the future home of the boards and designs I have made over the course of making my own projects. You can also visit my [[http://www.moocowproductions.org|website]] for stuff regarding my MidiBox projects, other hobbies, and my random blog posts about nothing :) I just started working on this page, but it will be the future home of the boards and designs I have made over the course of making my own projects. You can also visit my [[http://www.moocowproductions.org|website]] for stuff regarding my MidiBox projects, other hobbies, and my random blog posts about nothing :)
  
-  * [[gm5x5x5_-_allied_parts_list]] GM5x5x5 Allied Electronics Parts List]]+===== Projects ===== 
 + 
 +  * [[mb-sidr8tr:start|MB-SIDR8TR]] - Rackmount MidiBox-SID using the MB-6582 baseboard with customizations housed in a 3U rackmount chassis.
  
-===Boards===+===== Boards =====
  
 All these boards (and schematics) were created with the free version of [[http://www.cadsoft.de/|EagleCAD]]. Some designs have been marked up with some custom layers requires for [[http://www.batchpcb.com/|BatchPCB]] (specifically the silk-screening process). I'm always open to ideas if you know how to make the designs better! Otherwise, they are here for the taking to do with as you please. I only ask that you give credit where credit is due if you plan on making your own modifications. This is just a request, however, and isn't required :) All these boards (and schematics) were created with the free version of [[http://www.cadsoft.de/|EagleCAD]]. Some designs have been marked up with some custom layers requires for [[http://www.batchpcb.com/|BatchPCB]] (specifically the silk-screening process). I'm always open to ideas if you know how to make the designs better! Otherwise, they are here for the taking to do with as you please. I only ask that you give credit where credit is due if you plan on making your own modifications. This is just a request, however, and isn't required :)
  
-==C64 Optimized PSU==+==== C64 Optimized PSU ====
  
 This board is a re-creation of the power section of the [[http://ucapps.de/mbhp/mbhp_8xsid_c64_psu_optimized.pdf|C64 Optimized PSU]] schematic from ucapps. The nice thing is that it's quite tiny, although the regulator may tend to get hot my original design didn't account for adding a heatsink. For small setups, though, it should work. This board is a re-creation of the power section of the [[http://ucapps.de/mbhp/mbhp_8xsid_c64_psu_optimized.pdf|C64 Optimized PSU]] schematic from ucapps. The nice thing is that it's quite tiny, although the regulator may tend to get hot my original design didn't account for adding a heatsink. For small setups, though, it should work.
Line 15: Line 19:
 Details about this board can be found on [[http://www.midibox.org/forum/index.php/topic,11936.0.html|this]] forum post. I'll eventually add the schematics and board layout as a direct download from my website. Details about this board can be found on [[http://www.midibox.org/forum/index.php/topic,11936.0.html|this]] forum post. I'll eventually add the schematics and board layout as a direct download from my website.
  
-==BankStick 7-1==+==== BankStick 7-1 ====
  
 I built this board partly because I was having trouble building it on a prototype board. I based it off of the BankStick x8 schematic available from ucapps with minor modifications. I call it 7-1 because 7 chips can be placed on the board itself, with an optional header to make it possible to hook up an external BankStick. I built this board partly because I was having trouble building it on a prototype board. I based it off of the BankStick x8 schematic available from ucapps with minor modifications. I call it 7-1 because 7 chips can be placed on the board itself, with an optional header to make it possible to hook up an external BankStick.
Line 23: Line 27:
 Details can be found in [[http://www.midibox.org/forum/index.php/topic,11904.0.html|this]] forum post. Details can be found in [[http://www.midibox.org/forum/index.php/topic,11904.0.html|this]] forum post.
  
-==SID-PWR==+===== Misc =====
  
-This is a work-in-progress. It is an alternative to a C64 power supply and will supply +5 and +9V from a 9 or 12VAC transformer. Stepping down the heat is done via power resistors and heatsinks. So far, the protoboard design powers my MB-6582 nicely so I will eventually make a power board for it though may add to it +12V/-12V as an option (since I want to add an additional filter to my MB-6582).+  * [[gm5x5x5_-_allied_parts_list|GM5x5x5 Allied Electronics Parts List]]
  
-==ModMatrix== 
  
-This is another situation where I figured it would be easier to have a board printed than try to wire something up on a protoboard. This board is for the Modulation Matrix part of the MidiBox-SID [[http://ucapps.de/midibox_sid_manual_fp.html|control surface]]. At the time of this writing, I have not yet had this board printed as I'm waiting to take more measurements, settle on a front-panel design, etc. While it's untested, you can find the board layouts, schematic, and more info in [[http://www.midibox.org/forum/index.php/topic,12723.0.html|this]] post. 
m00dawg.1294271303.txt.gz · Last modified: 2011/01/05 23:48 by m00dawg