Differences

This shows you the differences between two versions of the page.

--- mb-606re [2016/07/24 00:47] – [Use with Midi] phatline
+++ mb-606re [2016/08/04 20:09] (current) – [1. UI Parts Listing] psykhaze
@@ Line 3: / Line 3: @@
 ===== Introduction =====
-The MB-606RE is a re-edit of CYM/HH and BD/SD drum parts of the Roland TR-606 to be controlled via MIDI (midibox) or CV through analog-Sequencers , in a a Eurorack-designed panel.\\
+The MB-606RE is a re-edit of CYM/HH and BD/SD drum parts of the Roland TR-606 to be controlled via MIDI (midibox MB-Modulbox) or CV through analog-Sequencers , in a a Eurorack-designed panel.\\
 Well known Circuit Mods from around Web & time are included by default.\\
-===== FrontPanel =====
-<wrap tip> On Re-design</wrap>
-**First Version**:
-{{ :neonking:mb606re.jpg?direct&600 |}}
-  *  {{::neonking:mb606re-drill-engraving-dxf.zip|Drilling + Engraving + SmashTV Core32 Layout}}
-===== General Design =====
-The MB-606re is part of the EuroLand Group... (606, 808, 909)\\
-It can be used in 2 Cases:\\
-Midi /CV+Trig\\
-**1. Midi:** Use the MB-Modulbox Standartmodules, for Digital UI and CV+Trig-Generation\\
-**2. CV+Trig:** Just Plug CV or Trig Jacks into the Analog Modules...without Midibox.\\
-==== Use with Midi ====
-=== MB-Modulbox Main PCB UI ===
-**Access** to System-Settings, Channel, NoteNumbers\\
-**CV+Trig Out-Jacks** for Euroland Drum Modules \\
-=== MB-Modulbox 8xPotentiometer Module ===
-When using the Euroland Modules via Midi, then there are some Performance Parameters aviable:\\
-All Functions have effect on all 8 Voices @ once.\\
-**1.Velocity Offset** (-+64 > with Center Postiton = normal)\\
-**2.Velocity Kill depending Note Kill** (-+64 > with Center Position = normal > Full Spectrum)\\
-**3.Random Kill** (0=full Kill, 127 no Kill, Normal Position > 127)\\
-**4.Velocity 2 TriggerLength** (-+64 > with Center Position = normal 10ms, turn right:time inc by velocity in%, turn left:decrease%)\\
-**5.Accent:** (0-127-normal 127)\\
-**6.------:** could be something like Roll\\
-**7.------:** not used, could be something like a Accent for a Group of CVs\\
-**8.------:** not used, could be something like a Accent for a Group of CVs\\
-accessable via MB-Modulbox 8xPot - PCB. Just plug it in, and acitivate the AIN-Port in MIOS\\
-=== MB-Modulbox 8x8 LED-Button-Matrix ===
-Set CV + Trig Routing (some kind of trigger matrix), standard is 1:1 routing, so no need for this if you use a fixed setup.
-==== Use with Midi or with Analog CV+Trig ====
-Here are only the Analog-Drum-PCB discussed, since all other Digital UI is based on MB-Modulbox Standart Modules, the MB-Modulbox Main PCB2 is special Variant, described here.
-=== 606 BD+SD, 606 HH+CY ===
-To spare Space: **we sandwich in 2 layers**\\
-  * **1st PCB** : BD+SD UI-PCB / HH+CY UI-PCB  >>> Breakoutboard+Potentiometer Boards
-  * **2nd PCB** : Analog Circuits: 2n We get the Analog Circuits mounted 90° angled with vertical female socket and angled DIL Pinheaders for better heat dissipation
-==== Sandwich view - Analog Boards ====
-{{ ::neonking:mb606re-sandwich.jpg?direct|}}
-.
 ===== Original Schematics =====
@@ Line 107: / Line 54: @@
 === Frontpanel ===
-  * [[https://www.thonk.co.uk/shop/3-5mm-jacks/| Jacks 3.5mm @ Thonk]]
-  * [[http://at.rs-online.com/web/p/kippschalter/7347145|SPDT Switch ON-OFF-ON @ Rs-components]]
-  * [[http://fr.rs-online.com/web/p/connecteurs-din/7105537/| Mini DIN 4 poles @ Rs-components]]
 ^ Value     ^  Type                    ^ Qty  ^
@@ Line 225: / Line 168: @@
   * 3,5mm Jack
   * Switch
 ==== 5. Schematics in KiCAD ====