Differences

This shows you the differences between two versions of the page.

--- seq [2007/09/20 17:18] – add link to forum re lcd connections nebula
+++ seq [2010/10/05 02:03] (current) – removed googleberry
@@ Line 1: / Line 1: @@
-===== The datawheel and 16 Knobs =====
-The datawheel and 16 Knobs are caps, which should plugged on the 17 rotary encoders.
-===== LTC-Modul =====
-The LTC-Modul is optional and for MIDI IN, 2xMIDI OUT and MIDI THRU Commands or MIDI-TO-COM Mode
-It's not necessary for a complete SEQ-Box.
-===== 9V PSU =====
-With a special circuit, it should be able to use the 9V PSU from FLOPPY 1541-II.
-===== Bankstick EEPROM =====
-For SEQ the maximum use are 2x 24LC256 or 1x 24LC512. The couple circuit should be built up like description under the menu-point "Bankstick". Details under http://www.ucapps.de/midibox_seq_options.html
-===== LCD Connection =====
-There is a schamatic of how to connect 2 LCDs: http://www.ucapps.de/mbhp_lcd.html
-Methods you may choose to do that (IDC cable, ribbon cable configuration, etc) are discussed in [[http://www.midibox.org/forum/index.php?topic=2782.0|this forum thread]].