Differences

This shows you the differences between two versions of the page.

--- seq_v4l_mk._ii [2016/11/20 16:54] – [Resistors (+link), Diodes and Switches] latigid_on
+++ seq_v4l_mk._ii [2017/02/15 20:49] (current) – [Firmware] latigid_on
@@ Line 1: / Line 1: @@
 ====== SEQ v4L mk II ======
-An updated SEQ V4L that only needs one ribbon connector to an LPC-17 or STM32F4 Core.
+An updated [[http://ucapps.de/midibox_seq_lite.html|SEQ V4L]] that only needs one ribbon connector to an LPC-17 or STM32F4 Core.
 {{:seqv4l:mbseqv4l_srio_frontpanel_tk.jpg?nolink&600|}}\\
 //Image credit: TK.//
 ===== Schematic =====
@@ Line 150: / Line 151: @@
 J8/9 connects to J8/9 of a Core module (LPC17 or STM32F4).
 ----
+==== Firmware ====
+{{:seqv4l:firmware.zip|}}
+This file should be uploaded to an STM32F4 Core
+The config file MBSEQ_HW.V4L should be copied to the root of the SD Card used. [[http://svnmios.midibox.org/listing.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4_lite%2Fhwcfg%2Fsrio_v4l%2F|It can be found on the SVN repository]].
+At some point these should be made available in the normal MIOS32 download section.
+A sessions folder will be created on first use if one doesn't exist. If you're having trouble with the MIDI Input, please open the SESSIONS/DEF_V4L/MBSEQ_C.V4 file and change:
+MIDI_BUS_Options 0 0x00
+to
+MIDI_BUS_Options 0 0x01