Differences

This shows you the differences between two versions of the page.

--- tm5-dindoutgate [2022/12/26 14:24] – [BOM] phatline
+++ tm5-dindoutgate [2022/12/28 19:57] (current) – [BOM] phatline
@@ Line 3: / Line 3: @@
 {{:phatline:TM5-DINDOUTGate-3D-Back.jpg?600|}}\\
-this is one essential part for my [[triggermatrix5]]\\
+\\
-it gives 24 Digital Inputs, and 32 Digital Outputs, while 16 Outputs are used for UI, the othere 16 are buffered, and are for use as 16 GAte/Triggger output at 5V Level\\
+**it gives;**\\
-i created this board. its fully SMD, and made it pick and place ready - so no soldering required!\\
+Digital Inputs\\
+Digital Outputs\\
+* while 16 Outputs are used for UI\\
+* the other 16 are buffered, and are for use as 16 GAte/Triggger output at 5V Level\\
+\\
+The Board is fully SMD, and made for pick and place - so no soldering required!\\
@@ Line 13: / Line 18: @@
 ====== Building and BOM======
-Its build by pick and place robots... so no need to build\\
+Its build by pick and place robots... so no need to build, or order any component\\
+you need this PCB 1x for [[triggermatrix5]]\\
 ===== BOM =====
+Follwing list is for reference, and debugging only,** no need to order them!** all the parts are already soldered on the PCB!\\
 ^qty		^reference		^value		^footprint		^jlc^