MIDIbox

User Tools

Site Tools

Trace: • resistor
tm5-gateinput

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
tm5-gateinput [2022/12/29 10:58] – created phatlinetm5-gateinput [2023/01/12 01:01] (current) – [Order-List] phatline
Line 1: Line 1:
 ====== TM5 Gate/Trigger Input ====== ====== TM5 Gate/Trigger Input ======
-{{:phatline:Display-Driver-SMD-3D-Front.jpg?600|}}\\ +{{:phatline:TM5-GateIn-3D-Front.jpg?600|}}\\ 
-{{:phatline:Display-Driver-SMD-3D-Back.jpg?600|}}\\+{{:phatline:TM5-GateIn-3D-Back.jpg?600|}}\\
  
 this is one essential part for my [[triggermatrix5]]\\ this is one essential part for my [[triggermatrix5]]\\
-This can make a Levelshift from 5V to the for the MCU required 3V, with a Resistor Divider, and is overvoltage Protectect with TVS-Diodes, also there is a Preamp-Section, if you want 5V, 3V oder Pre-Amped input can be set vie Jumpers and Potentiometers, the PCB itself should be mounted on the Groundplate off the housing, the housing should have a service-plate to access this Settings!\\+*  Levelshift from 5V to the for the MCU required 3V, with a Resistor Divider\\ 
 +*  Overvoltage Protectect with TVS-Diodes\\ 
 +*  Preamp-Section\\ 
 +\\ 
 +5V, 3V or Pre-Amped input - can be set vie Jumpers and Potentiometers, the PCB itself should be mounted on the Groundplate off the housing, the housing should have a service-plate to access this Settings!:\\ 
 +{{:phatline:TM5-GateIn-3D-Seitlich.jpg?600|}}\\ 
 +\\ 
 +8 Channels, are managed here, so in order to have 16channels, you need 2 off this PCBs\\ 
 +if you dont want a Preamp, then dont stuff the Preamp-section > this will make this PCB a lot off cheaper!\\
  
  
  
 ====== Shematic ====== ====== Shematic ======
-{{:phatline:Display-Driver-SMD-Shematic.pdf?400|}}\\ +{{:phatline:TM5-GateIn-Schema.pdf?920|}}\\ 
-{{:phatline:Display-Driver-SMD-Shematic.jpg?600|}}\\+{{:phatline:TM5-GateIn-Schema.jpg?920|}}\\
  
 ====== Building and BOM====== ====== Building and BOM======
-===== BOM ===== +dont order this Parts, they are mostly pre-soldered on the PCB!\\
-Follwing list is for reference, and debugging only,** no need to order them!** all the parts are already soldered on the PCB!\\ +
 ^Comment ^Designator ^Footprint ^LCSC^ ^Comment ^Designator ^Footprint ^LCSC^
-| 10uF | C1-18,C34-54 | 0805_C | CL21A106KAYNNNE | +| 8 | VR1 -VR8 | Poti-SMD-200K-3224W-1-204E 1204E C55072 | 
-| 100n | C19-33 | 0402_C | C307331 | +| 8 | C1-1, C2-1, C3-1, C4-1, C5-1, C6-1, C7-1, C8-1 | 2N2 | C_0402 | C1531 | 
-| - | CS1,LCD1-18,inB10,outB10,in15 | PinHead-SMD-2,54mm Pitch | C192300 | +| 8 | C1-4, C2-4, C3-4, C4-4, C5-4, C6-4, C7-4, C8-4 | 33p | C_0402 | C1562 | 
-| SN74HC541 | IC1-7 | SOIC127P780X200-20N | C116811 | +| 8 | C1-5, C2-5, C3-5, C4-5, C5-5, C6-5, C7-5, C8-5 | 100n | C_0402 | C307331 | 
-| 74HC595 | IC8-10 | SOIC-16 | C5947 | +| 8 | C1-2, C2-2, C3-2, C4-2, C5-2, C6-2, C7-2, C8-2 | 330n | C_0805 | C1740 | 
-| 220 OHM | R1-54 | 0402_R | C25091 | +| 16 | C1, C1-3, C2, C2-3, C3, C3-3, C4, C4-3, C5, C5-3, C6, C6-3, C7, C7-3, C8, C8-3 | 10uF | C_0805 | C440198 | 
-| 1K OHM | R55-96 | 0402_R | C11702 |+| 8 | R1-4, R2-4, R3-4, R4-4, R5-4, R6-4, R7-4, R8-4 | 10K | R_0402 | C25744 | 
 +| 16 | R1-2, R1-3, R2-2, R2-3, R3-2, R3-3, R4-2, R4-3, R5-2, R5-3, R6-2, R6-3, R7-2, R7-3, R8-2, R8-3 | 220K | R_0402 | C25767 | 
 +| 8 | R1-1, R2-1, R3-1, R4-1, R5-1, R6-1, R7-1, R8-1 | 4K7 | R_0402 | C25900 | 
 +| 8 | Ri1 – Ri8 | 220 | R_0603 | C22962 | 
 +| 8 | Rd1 – Rd8 | 330 | R_0603 | C23138 | 
 +| 4 | Amp1 - Amp4 | OP-Amp-TLC2272ACDR | SOIC127P600X175-8N | C478072 | 
 +| 2 | TVS1, TVS2 | 3V-4fach-TVS-PRTR5V0U4D,125 | SOT95P275X110-6N | C96236 | 
 +| 1 | Gate1 | J89-Header-2x5 | Con-2x5-J89 | 
 +| 1 | J5A/B1 | AIN | Con-2x5-J89 | 
 +| 8 | Asel1 – Asel8 | - | PinHeader_1x03 | 
 +| 8 | Ji1 - Ji8 | 5V/3V | PinHeader_2x01 | 
 +| 8 | Jm1 - Jm8 | Amped | 2x01 |
  
 ===== Order-List ===== ===== Order-List =====
-copy following list into this [[https://www.mouser.com/tools/part-list-import.aspx|mouser.com-Link]] +This Quantitys are for 2 Boards:\\
-<WRAP center round box 60%> +
-710-61200823021|22\\ +
-</WRAP> +
-\\ +
-**Order from Reichelt:**\\ +
-17x[[https://www.reichelt.de/at/de/buchsenleiste-7-pol-gerade-rm-2-54-h-7-0-mm-bl-1x07g7-2-54-p180554.html?&trstct=pol_0&nbc=1|Female Pinheader 1x7pin]]\\+
  
 +**Order from Reichelt:**\\
 +3x [[https://www.reichelt.de/at/de/stiftleiste-20-polig-raster-2-54mm-bkl-10120204-p235649.html?&trstct=pol_2&nbc=1|1x20Pin Male 2,54mm Header]]\\
 +4x [[https://www.reichelt.de/at/de/pfostenbuchse-10-polig-mit-zugentlastung-pfl-10-p14571.html?&trstct=pos_0&nbc=1|2x5Pin FeMale 2,54mm Header]]\\
 +32x [[https://www.reichelt.de/at/de/kurzschlussbruecke-rot-rm-2-54-vergoldet-jumper-2-54-rt-p9016.html?&trstct=pos_6&nbc=1|Jumper]]
  
-{{:phatline:Display-Driver-SMD-PCB.jpg?600|}}\\+{{:phatline:TM5-GateIn-PCB.jpg?600|}}\\
 ====== To Do ====== ====== To Do ======
 waiting for the assembled Prototype\\ waiting for the assembled Prototype\\
tm5-gateinput.1672311528.txt.gz · Last modified: 2022/12/29 10:58 by phatline