Differences

This shows you the differences between two versions of the page.

--- triggermatrix4 [2021/07/29 21:59] – [Pictured Doku] phatline
+++ triggermatrix4 [2021/10/21 13:39] (current) – phatline
@@ Line 1: / Line 1: @@
 ====== TriggerMatrix V4 ======
+**REAL:**\\
+{{:phatline:tm4-perspektive-l.hd-.jpg?700|}}\\
+**CAD-Design:**\\
 {{:phatline:TM4-Render-black.jpg?700|}}\\
 \\
@@ Line 6: / Line 11: @@
 \\
 ===== CODE, FIRMWARE =====
-{{:phatline:tm_V3.zip|the Code}} FIXME upload TM4 Code\\
+**Install [[http://www.ucapps.de/mios_studio.html|MIOS Studio]], connect TM4 via USB, and Start the STUDIO**\\
+\\
+**1. Upload [[http://www.ucapps.de/mios32/mios32_bootloader_v1_018.zipm|MIOS BOOTLOADER]]**\\
+**2. (only needet for Virgin Machines) type following commands into the MIOS-TERMINAL:**\\
+  * set lcd_type GLCD_SSD1306_ROTATED\\
+  * set lcd_num_x 9\\
+  * set lcd_num_y 1\\
+  * set lcd_width 128\\
+  * set lcd_height 64\\
+  * store\\
+**3. (for Version Updates) Unzip {{:phatline:TM4.zip|the TM4-Firmware}}, and Upload the TM4.hex**\\
+**4. Unconnect USB & Connect the USB again --- finished.**\\
+**5. If the Machine is not detected by mios studio, and you already checked the usb-connections, the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "bLOAD", now you can upload new & unbroken codes, dont forget to set it to "normal" back again - after upload new code - else the APP will not boot...**\\
 ===== BUILD =====
@@ Line 34: / Line 51: @@
   * 3mm Alu Plates for Ground and Backpanel (you cut and drill it by your own)
   * 3mm Alu Frontpanel, CNC-machined (See DXF-File for more info)
+===== MODs =====
+==== Stable USB-Type-B - Mod ====
+{{:phatline:TM4-USB-TYPE-B-MOD.jpg?400|}}\
 ====Pictured Doku====
@@ Line 54: / Line 77: @@
 {{:phatline:TM4-Labeled.jpg?400|}}\\
 **Wires:**\\
-{{:phatline:TM4-Wire-Fader-Detail.jpg?400|}}\
+{{:phatline:TM4-Wire-Fader-Detail.jpg?400|}}
-{{:phatline:TM4-Wires.jpg?400|}}\\
+{{:phatline:TM4-Wires.jpg?400|}}
+{{:phatline:TM4-Wired.jpg?400|}}
 \\
 **Wood-Elements:**\\
@@ Line 61: / Line 85: @@
 {{:phatline:TM4-Woods-measures.jpg?700|}}\\
 {{:phatline:TM4-Woods-paint.jpg?700|}}\\
+{{:phatline:TM4-Wood-Mount.jpg?700|}}\\
+**Screws:**\\
+{{:phatline:TM4-PCB-Spacer.jpg?700|}}\\
+{{:phatline:TM4-M2-Nuts.jpg?700|}}\\
 \\
 **DIY-Back-Panel:**\\
@@ Line 102: / Line 132: @@
   * Free programmable Swing to each Step, with 2 different swing Length-sets, which are controlled live with encoder\\
   * copy, paste, erase of pages\\
-  * copy, paste, erase of rows\\E
+  * copy, paste, erase of rows\\
   * fixed forward play direction\\