Differences

This shows you the differences between two versions of the page.

--- triggermatrix4 [2021/07/31 13:01] – [CODE, FIRMWARE] phatline
+++ triggermatrix4 [2021/10/21 13:39] (current) – phatline
@@ Line 1: / Line 1: @@
 ====== TriggerMatrix V4 ======
-{{:phatline:TM4.jpg?700|}}\\
-**Planed in 3D:**\\
+**REAL:**\\
+{{:phatline:tm4-perspektive-l.hd-.jpg?700|}}\\
+**CAD-Design:**\\
 {{:phatline:TM4-Render-black.jpg?700|}}\\
 \\
@@ Line 19: / Line 22: @@
   * set lcd_height 64\\
   * store\\
-**3. (for Version Updates) Unzip {{:phatline:TM4.zip|the TM4-Firmware}}, and Upload the TM4.hex\\
+**3. (for Version Updates) Unzip {{:phatline:TM4.zip|the TM4-Firmware}}, and Upload the TM4.hex**\\
-**4. Unconnect USB & Connect the USB again --- finished.
+**4. Unconnect USB & Connect the USB again --- finished.**\\
-**X. If the Machine is not detected by mios studio, and you already checked the usb-connections, the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "bLOAD", now you can upload new & unbroken codes, dont forget to set it to "normal" back again - after upload new code - else the APP will not boot...\\
+**5. If the Machine is not detected by mios studio, and you already checked the usb-connections, the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "bLOAD", now you can upload new & unbroken codes, dont forget to set it to "normal" back again - after upload new code - else the APP will not boot...**\\
 ===== BUILD =====
@@ Line 48: / Line 51: @@
   * 3mm Alu Plates for Ground and Backpanel (you cut and drill it by your own)
   * 3mm Alu Frontpanel, CNC-machined (See DXF-File for more info)
+===== MODs =====
+==== Stable USB-Type-B - Mod ====
+{{:phatline:TM4-USB-TYPE-B-MOD.jpg?400|}}\
 ====Pictured Doku====