MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Introduction =====

Started my first (and so far only) midibox project in the winter of 2006.
The prototype was completed 3 months later, but it sat untouched for a very long time.


{{http://farm1.static.flickr.com/105/309416761_7f34ea7447_m.jpg }}

In the summer of 2009, I was determined to finish the [[Chaos Matrix|Chaos Matrix]] and began completing its construction.

===== Projects =====
Click [[Chaos Matrix|here]] for the [[Chaos Matrix|Chaos Matrix]] project page.

The Chaos Matrix is a control surface and programmer for an Oberheim Matrix 1000 synthesizer.
It uses MIOS v1.9c on a PIC18F452 microprocessor along with a custom application built with the C skeleton interface.

{{http://farm1.static.flickr.com/110/304313172_54ad33d062_m.jpg }}
{{http://farm3.static.flickr.com/2644/3984367729_53df11c986_m.jpg }}
{{http://farm3.static.flickr.com/2596/4163202942_47d93fd6f3_m.jpg}}


-Patrick Manderson