Differences

This shows you the differences between two versions of the page.

--- euro-aout-ng-connector-board [2022/01/25 02:43]
phatline
+++ euro-aout-ng-connector-board [2022/01/26 03:27] (current)
phatline [Building and BOM]
@@ Line 1: / Line 1: @@
-====== EuroRack - Midi IO - Board ======
+====== EuroRack - AOUT-NG - IO-Port and Frontpanel ======
+{{:phatline:Euro_AOUT_NG_CON_3D_assambled.jpg?600|}}\\
 {{:phatline:Euro_AOUT_NG_CON_3D_Draft.jpg?600|}}\\
 {{:phatline:Euro_AOUT_NG_CON_3D_Panel.jpg?900|}}\\
@@ Line 27: / Line 28: @@
 \\
-x (or 20x) [[https://www.buerklin.com/de/Montageblock/p/17H917|Leiterplatten Montageblock aka Standoffs]] 100x summed 30€\\
+x [[https://www.buerklin.com/de/Montageblock/p/17H917|Leiterplatten Montageblock aka Standoffs]] 100x summed 30€\\
-You will also need M3 Screws - 2 off them...\\
+You will also need M3 Screws - 4 off them...\\
 Also here it is clever to order 100 pieces for a cheaper price - you will need this on all my projects...\\
+if you order the PCB via my Gerbers you get 4 PCB on 1 100x100mm PCB... on JLCPCB you get min 5 of thes PCBs...
+so you may order the needet Parts 20x times
 ====== Frontpanel======
@@ Line 36: / Line 40: @@
 **A cheaper way is: order a 1,6mm thick Aluminium PCB as Frontpanel:**\\
-I will test this... this are the gerbers:\\
+I will test this... later the gerbers:\\
+{{:phatline:Euro_AOUT_NG_CON_FP-Measurement.jpg?900|}}\\

MIDIbox