This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
lre-oled-bar2 [2023/09/07 21:17] phatline [Hardware Requirements] |
lre-oled-bar2 [2023/09/12 14:24] (current) phatline [Frontpanel] |
||
---|---|---|---|
Line 18: | Line 18: | ||
====== Hardware Requirements ====== | ====== Hardware Requirements ====== | ||
- | * [[http://www.ucapps.de/mbhp_core_stm32f4.html]]a MIOS32 Core to connect too\\ | + | * a[[http://www.ucapps.de/mbhp_core_stm32f4.html|MIOS32-Core]] to connect too\\ |
- | * [[DisplayDriver-SMD]] which buffers the Displays | + | * [[DisplayDriver-SMD]] which buffers the Displays, they are already assambled, and 5 pieces costs around 60€ - you only need 1 PCB here (60/5=12€) - the 4 left you will definitfly need some time...\\ |
* Soldering Iron - with a Dip that can Handle Thruhole-Parts, solder Paste...\\ | * Soldering Iron - with a Dip that can Handle Thruhole-Parts, solder Paste...\\ | ||
* [[mb-lre8x2cs_pcb]] for its nature use\\ | * [[mb-lre8x2cs_pcb]] for its nature use\\ | ||
* [[LRE5-LCD2]] as UI to handle Patch management and automation (if you want to use my code...) | * [[LRE5-LCD2]] as UI to handle Patch management and automation (if you want to use my code...) | ||
* You may need a [[http://www.ucapps.de/mbhp_din.html|DINX4]] Module, in order to get the encoders inbuilt Pushbotton to work\\ | * You may need a [[http://www.ucapps.de/mbhp_din.html|DINX4]] Module, in order to get the encoders inbuilt Pushbotton to work\\ | ||
- | * I have not already you will need a IDC-Crimper for all your Midibox Cables [[https://www.reichelt.de/at/de/presszange-fuer-schneidklemmverbinder-mit-adaptersatz-delock-86830-p312387.html?&trstct=pos_0&nbc=1|reichelt]] | + | * If you have not already - you will need a IDC-Crimper for all your Midibox Cables [[https://www.reichelt.de/at/de/presszange-fuer-schneidklemmverbinder-mit-adaptersatz-delock-86830-p312387.html?&trstct=pos_0&nbc=1|reichelt]] |
====== Shematic ====== | ====== Shematic ====== | ||
Line 48: | Line 48: | ||
I made a DXF File which you can send to [[https://www.formulor.de/|Formulor in Germany]]\\ | I made a DXF File which you can send to [[https://www.formulor.de/|Formulor in Germany]]\\ | ||
- | i panalized it so there are 2 Plates in it\\ | + | 2 Plates in one File: {{:phatline:LRE-OLED-BAR2-FP-FORMULAR.zip?700|}}\\ |
I payed 40€ summed for booth plates incl shipping from Germany to Austria\\ | I payed 40€ summed for booth plates incl shipping from Germany to Austria\\ | ||
- | {{:phatline:LRE-OLED-BAR2-FP-FORMULAR.zip?700|}}\\ | ||
- | **Recommend Material from Formulor:**\\ | + | 2 Plates & 2 Plates for a [[• lre5-lcd2]] in one File:{{:phatline:FP-LRE-OLED-2X-EURO-FORMULAR-2xLRE5LCD2.zip?700|}}\\ |
- | 3mm Acrylglas GS 384x384mm, mittelgrau transparent(7C83)\\ | + | I payed 45€ summed for booth plates incl shipping from Germany to Austria\\ |
+ | |||
+ | **Recommend Material from Formulor:**\\ | ||
+ | 3mm Acrylglas GS 384x384mm, mittelgrau transparent(7C83)\\ | ||
====== To Do ====== | ====== To Do ====== | ||
The LRE-OLED-Bar & The Frontpanel are a Part of my [[MSQ-CC-LRE-V2]]\\ | The LRE-OLED-Bar & The Frontpanel are a Part of my [[MSQ-CC-LRE-V2]]\\ |