User Tools

Site Tools


midibox_cv_v1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
midibox_cv [2007/12/31 21:22] – organize page, add link for encoder+inc/dec nebulamidibox_cv_v1 [2016/03/23 09:46] (current) – ↷ Page name changed from midibox_cv to midibox_cv_v1 admin
Line 14: Line 14:
 =====Links===== =====Links=====
  
-  * [[How to use MIDIbox CV with a dout]] +  * [[how_to_use_midibox_cv_with_a_dout]] 
-  * [[How to use MIDIbox CV with a dout GERMAN]]+  * [[how_to_use_midibox_cv_with_a_dout_german]]
   * [[http://www.midibox.org/forum/index.php?topic=10412.msg78685#msg78685|How to use an encoder and up/down buttons on the same MIDIbox CV]] <sup>Forum</sup>   * [[http://www.midibox.org/forum/index.php?topic=10412.msg78685#msg78685|How to use an encoder and up/down buttons on the same MIDIbox CV]] <sup>Forum</sup>
- 
  
 =====Proposals for additional functions in future firmware versions===== =====Proposals for additional functions in future firmware versions=====
Line 28: Line 27:
    * Adress note on to different trigger outs, depending on "velocity zones", eg to turn on accent or glide by velocity           * Adress note on to different trigger outs, depending on "velocity zones", eg to turn on accent or glide by velocity       
    * Save different settings    * Save different settings
-   +   * "Rotate" note assignment in Poly mode (select "four voices" for example, then outputs 1-4 will rotate, advancing always with the next note. "Random" would also be nice. See: Oberheim 4-Voice.) 
 +   * Vibrato LFO. Freerunning LFO summed into oscillator note output, amount controlled by Mod Wheel or Aftertouch, with a user-selected maximum output amount. In addition to existing note/pitch wheel summing. Useful here with multiple "note" channels, as opposed to the MIDIbox SID's limit of 2. If use of LFO out only is desired, note value can be used as an offset. 
 +   * Support for realtime, encoder control of DIN Sync clock value (4 bars, 2 bars...1/4 notes, 1/4 note triplets, up to the maximum. See: Flame Clockwork. MIDI synch of LFO via this control, in this project, would be wonderful.) 
 +   * Independent Pitch Wheel +/- ranges. 
 +   * Support of multiple AOUTs to link 8-note/8-gate with 8-velocity/CC/etc.
midibox_cv_v1.1199136156.txt.gz · Last modified: 2008/05/17 02:45 (external edit)