This is an old revision of the document!
====== Core 4 Discoveryboard STM32F407VGT6 ====== {{:phatline:Core4Disc-3D-front.jpg?600|}}\\ {{:phatline:Core4Disc-3D-back.jpg?600|}}\\ this is one essential part for my [[triggermatrix5]]\\ i need a core pcb which is aviable in Europe, and uses the stm32F407VGT6 chip, which has 1MB ram...\\ \\ ====== Shematic ====== {{:phatline:Core4Disc-shematic.pdf?400|}}\\ {{:phatline:Core4Disc-shematic.jpg?600|}}\\ ====== Building and BOM====== parts off it is pick and place the other part is handsolder\\ ===== BOM ===== the LCSC Parts are done with the Pick and place - so no need to order...\\ ^Comment ^Designator ^LCSC ^Lot^ | SN74HC541 | IC1 | C116811 | 1 | | 1K | Ra1,Rb1,Rc1,R5,R6,R7,R8,R24 | C11702 | 8 | | J10B | GPIO1 | C124391 | 1 | | AIN | J5A/B1 | C124391 | 1 | | DIN/DOUT | J8/1 | C124391 | 1 | | MCP3208 | IC2,IC3 | C16939 | 2 | | 10 | R17 | C17902 | 1 | | 6N138-SMD | O1,O2,O3,O4 | C188666 | 4 | | Pin-Header-2x4-SMD-doubleSizeSymbol | AIN0,AIN1 | C192300 | 2 | | J4A+B | IIC1 | C192300 | 1 | | J15A | JA15 | C192300 | 1 | | J10B | JB10 | C192300 | 1 | | - | Midi1 | C192300 | 1 | | LED | LED1 | C2286 | 1 | | 220 | R1,R2,R3,R4,R13,R14,R15,R16,R18,R19,R20,R21 | C25091 | 12 | | 2K2 | R22,R23,R25,R26 | C25879 | 4 | | 4K7 | R9,R10,R11,R12 | C25900 | 4 | | 100n | C4,C6,C7,C8,C10,C12 | C307331 | 6 | | 10uF | C1,C2,C3,C5,C9,C11,C13,C14,C15 | C440198 | 9 | | uSD-Molex | SD1 | C585350 | 1 | | 1N4148W | D1,D2,D3,D4,D6 | C81598 | 5 | The Mouser parts that have to be soldered by hand - you have to order them on your own...: ^Comment ^Designator ^MouserNumber ^Lot^ | PW2 | TSR_2-2450 | 495-TSR2-2450 | 1 | | USB1 | USB-B-Socket | 538-67068-8000 | 1 | | D5 | 1N5818 | 583-1N5818-T | 1 | | Midi1 | - | 649-1012938390801ALF | 1 | | Midi-IN1, Midi-IN2, Midi-OUT1, Midi-OUT2 | Midi-KCDX-5S-S2 | 806-KCDX-5S-S2 | 4 | | AIV-1 | AIN-Voltage | Pin Header | 1 | | DISC1 | STM32F4DISCOVERY | 511-STM32F407G-DISC1 | 1 | | J1 | PWR-USB | Pin Header | 1 | | J2 | USB Pin | Header | 1 | | J15S1 | LCD V-Sel | Pin Header | 1 | | J18 | CAN | Pin Header | 1 | | LCD-PSU1 | LCD-PSU | Pin Header | 1 | | PW1 | PJ-079BH | 490-PJ-079BH | 1 | | SW1 | Power | 611-1101M2S4AV2BE2 | 1 | | SW2 | Bootload | 611-1101M2S4AV2BE2 | 1 | | SW3 | OTG | 611-1101M2S4AV2BE2 | 1 | | USB3 | USB_A-Molex | 538-89485-8000 | 1 | | IDC-Connector | 2x4 Male | 710-61200823021 | 4 | ===== Order-List ===== copy following list into this [[https://www.mouser.com/tools/part-list-import.aspx|mouser.com-Link]] <WRAP center round box 60%> 495-TSR2-2450|1\\ 538-67068-8000|1\\ 583-1N5818-T|1\\ 649-1012938390801ALF|1\\ 806-KCDX-5S-S2|4\\ Pin Header|1\\ 511-STM32F407G-DISC1|1\\ 490-PJ-079BH|1\\ 611-1101M2S4AV2BE2|1\\ 611-1101M2S4AV2BE2|1\\ 611-1101M2S4AV2BE2|1\\ 538-89485-8000|1\\ 517-89110-0101|4\\ 710-61200823021|4 </WRAP> **Order from Reichelt:**\\ 2x [[https://www.reichelt.de/at/de/2x25pol-buchsenleiste-gerade-rm-2-54-bl-2x25g-2-54-p6080.html?&trstct=pol_2&nbc=1|2x25Pin Female 2,54mm Headers]]\\ 1x [[https://www.reichelt.de/at/de/stiftleiste-20-polig-raster-2-54mm-bkl-10120204-p235649.html?&trstct=pol_2&nbc=1|1x10Pin Female 2,54mm Headers]]\\ 1x [[https://www.reichelt.de/at/de/2x10pol-stiftleiste-gerade-rm-2-54-sl-2x10g-2-54-p19488.html?&trstct=pol_0&nbc=1|2x10Pin Female 2,54mm Headers]]\\ {{:phatline:Core4Disc-board.jpg?600|}}\\ ====== To Do ====== waiting for the assembled Prototype\\ ====== Community users working on it ====== * **[[Phatline]]** = PCB & Shematic, UI-Programming, Documentation...\\ Just let a Private message on the forum to user already involved.\\ or join the forum: [[http://midibox.org/forums/topic/28777-triggermatrix-5/|Triggermatrix 5]]\\
